1, disassemble the lid of the United States rice cooker need to prepare the following tools: Phillips screwdriver, a screwdriver, self-tapping screws.

2, the following first use a screwdriver to pry open the lid handle of the U.S. rice cooker, use a Phillips screwdriver to unscrew the screws inside the handle to remove the handle first can be, see the picture below.

3, the next need to open the United States of America rice cooker lid, in the lid of the rotating position there are two rubber sealed screw holes, with the preparation of the thin thin self-tapping screw tool, the rubber can be taken out, see the picture below.

4, and then use a Phillips screwdriver to unscrew the two screws, will cover the surface of the exhaust holes at a screw removed, you can remove the panels of the lid, as shown in the figure below.

5, the following in the United States to open the rice cooker lid panel, remove the inside of the connecting rod and the pressure sealing ring inside the lid, you can remove the lid locking iron ring, see the picture below.

6, the following and then remove the lid panel within the 9 screws, you can remove the lid panel button board, see the circuit board inside, as shown in the figure.

7, finally the lid of the U.S. rice cooker is removed, as shown in the picture below.