Adjust the shift switch (number of tiles pressed) on the automatic mahjong table, the specific steps for machine adjustment are as follows (***14 steps):

1, first use your finger to click on any of the lift buttons operated in the center of the automatic mahjong table.

2, after the operation disk rises to reveal the shuffle cylinder, push all the mahjong tiles on the table.

3, wait a few seconds, the system prompts the mahjong has been shuffled, close the mahjong table power switch.

4, use your hand from the outside to automatically layer the mahjong table around, do not use brute force, so as not to damage the layering.

5, pick up the surrounding layering and carefully put it aside for spare.

6, then pick up the green panel of the automatic mahjong table.

7. On the back of the mahjong table panel there is a paper label called "Game Plan Number Sheet", look for it.

8, in the game plan number shift table, 108 mahjong corresponds to the 18th (3 players) or 19th (4 players) sheet.

9. The following diagram shows the interior of an automatic mahjong table. The gear switch is located in the lower left corner.

10, then change the internal switch of the automatic mahjong table to 18 (3 persons) or 19 (4 persons).

11, then you can put the automatic panel and layering on the mahjong table.

12, turn on the power start switch of the automatic mahjong table.

13, use your thumb and forefinger to press the two rise buttons on the center control panel of the automatic mahjong machine at the same time.

14, the mahjong tiles automatically rise to the table, and friends can play a few rounds of 108 mahjong.