DIY beaded fruit plate production steps:

The bottom is as shown below.

1. Make a six-bead circle first.

2. Six-bead circle p>

5. Six-bead circle X24

In this way, the first layer is completed.

A total of four layers (including the bottom as the first layer):

When the second layer is heightened (the heightening is all four-bead circles). Four red (purple) beads on the high side (side); four red (purple) beads on the side (flat surface); after the heightening is completed, start making the flat surface, which is a six-bead circle. There are six red (purple) beads on the outer edge and three red (purple) beads in the middle of the plane.

When the third layer is heightened (the heightening is all four-bead circles): the outermost sides of the height (side) are two green beads. The others are red (purple) beads, the outermost sides (plane) are two green beads, and the middle are four red (purple) beads;

After the heightening is completed, start making a flat six-bead circle. There are six green beads on the outer edge, and four green beads in the middle of the plane

When the fourth layer is heightened (the heightening is all four-bead circles): the height (side) is four green beads, and the sides are (Flat surface) is four green beads;

After the heightening is completed, start making a flat six-bead circle. Add a brown bead in the middle of the four green beads.

That's it. The above is just one side of it. Then the color matching of the other five sides is the same as above.