Handmade soaps are comfortable and natural for your skin when you wash them. Let the handmade soap experts share a few simple and good handmade soap recipes. Don't worry about the complicated process. You can easily make soap in just 5 to 20 minutes.

Know before you make soap.

The basic elements of solid soap are "oil, water and sodium hydroxide". In addition to these three, soaps on the market add essential oils, fragrances and ingredients to make "it" look and smell richer. If you can make your own handmade soap, you will have a better grasp of the quality and feel more comfortable using it.

Handmade soap doesn't require sophisticated equipment. It is straightforward to make good use of common household utensils and tools, such as steel pans, whisks, milk drinks and other cardboard boxes that can be used to "soap". She reminded, do soap have a few special attention: because of the handmade soap need to add sodium hydroxide, add water will heat cooling. If you do not pay attention, it will often stick to the skin, creating a burning sensation, but also may be choked by the slight fumes.

Basic tools:

1, red palm oil soap

Five minutes to complete! If you are allergic to nuts, please try to wash the inside of the arm first, if there is no allergic reaction before extensive use of materials: 350 grams of red palm oil, 49 grams of sodium hydroxide, purified water ice 114 grams. Weigh red palm oil, sodium hydroxide and ice in grams and set aside.

Place the ice cubes in a stainless steel pot, then pour in the sodium hydroxide in 3 ~ 4 times (each time about 30 seconds apart). At the same time, stir rapidly with a stirring rod → Processing named so that the sodium hydroxide is completely dissolved in the lye solution. If the lye solution is not completely dissolved, it can also be filtered through a sieve.

Measure the temperature of the red palm oil and the lye solution with a thermometer, both below 35°C, with a temperature difference of 10°C or less, then mix the red palm oil and pour it slowly into the lye solution, stirring with a whisk → Processing Naming Hand for about 5 minutes. If the temperature difference is higher than 10 ℃, it is recommended to take a low temperature, slightly hot. Try to draw 8 on the surface of the soap solution. if you can see the font mark, the consistency is up to standard.

Pour the soap solution into a cardboard box, let it sit for 24 hours, remove the cardboard box, and use a rubber spatula → processing, naming, and demolding. You can leave it in the styrofoam box for about 2-3 days to avoid the soap powder affecting the beauty. This handmade soap is bright orange and the color will fade to white over time, but it does not affect the use. If you want to prolong the original color, you can wrap it in opaque paper and keep it in a dry and ventilated place.

2, rice bran oil soap

10 minutes to complete! Materials: 350 grams of rice bran oil, sodium hydroxide 45 grams of pure water ice 103 grams, soap bars appropriate. Weigh rice bran oil, sodium hydroxide and ice, in grams, spare.

Put the ice cubes into a stainless steel pot, then pour in the sodium hydroxide in 3 ~ 4 times (each time about 30 seconds apart). At the same time, stir rapidly with a stirring rod → Processing named so that the sodium hydroxide is completely dissolved in the lye solution. If the lye solution is not completely dissolved, it can also be filtered through a sieve.

The lye solution is used up, use a thermometer to measure the temperature of rice bran oil, avocado oil and lye solution, all below 35 ℃, the temperature difference is within 10 ℃, you can pour the two kinds of oils into the lye solution in turn, and beat with your hands for about 15 to 20 minutes. Pour the mixed soap into the carton. Since different oils will affect the demolding time, it is recommended to leave it for about 3 ~ 7 days before demolding with a rubber spatula → Processing named. If there is more moisture or rainy season, the demolding time can be delayed.

3. Coconut Sesame Refreshing Shampoo Soap

15 ~ 20 minutes to finish! Ingredients:350g of coconut oil, 350g of castor oil, 112g of sodium hydroxide, 350g of pure water ice.

Weigh coconut oil, castor oil, sodium hydroxide and ice in grams and set aside. In the fall and winter months, coconut oil needs to be heated with water before mixing with other liquid oils.2 Place the ice cubes in a stainless steel pan, then pour in the sodium hydroxide in 3 ~ 4 batches (about 30 seconds apart each time). Stir rapidly at the same time to completely dissolve the sodium hydroxide in the lye. If the lye is not completely dissolved, you can also strain it through a sieve.

After the lye is used up, slowly pour the grease into the lye. Do you use a stirring stick? Stir for about 15 to 20 minutes until the soap thickens slightly. Also, try drawing 8 on the surface of the soap. if the font markings are visible, pour the soap into a cardboard box. It is recommended to leave it for about 3 ~ 7 days, using a rubber spatula to release the mold → process the naming, and place it in a styrofoam carton for about 2 ~ 3 days after completion to avoid soap powder.