Gas Can Conversion Barbecue Stove Video Tutorial is as follows:Video Link

1, Step 1: Prepare materials and tools, first of all, you need to prepare the following materials and tools: an old gas canister, a wrench, a screwdriver, a hacksaw, a power drill, a fireproof cloth , some barbecue nets, some wire, some charcoal for barbecue. Step 2: Clean the gas can, clean the gas can and make sure there is no grease and rust inside and outside.

2, Step 3: Cut the gas canister, use a hacksaw to cut the gas canister into two halves, one half as the bottom of the barbecue, and the other half as the lid of the barbecue. During the cutting process, pay attention to safety to avoid cutting your fingers. Step 4: Sanding the Gas CanisterUse sandpaper to sand the cutout of the gas canister smooth to prevent sparks from flying when grilling.

3, Step 5: Install the barbecue net, install the barbecue net at the bottom of the gas tank, you can use the wire to fix it. On top of the grill net, you can install a grill rack for placing food. Step 6: Make a chimney, use an electric drill to drill a hole in the lid of the gas tank for smoke exhaust. Then, pass a long piece of wire through this hole to act as a chimney.

The precautions for using a gas tank are as follows:

1. Installation location: the gas tank should be installed in a well-ventilated place far away from the fire source, avoiding direct sunlight. At the same time, the gas tank can not be stacked around flammable and explosive substances. Check for leaks: Before using the gas tank, you should check whether there are leaks in the gas pipeline. This can be detected by smelling and applying soapy water. If you find any leakage, you should close the gas valve immediately and report it for repair.

2, the use of gas appliances: the use of gas appliances, should ensure that its connection with the gas tank sealed well, to avoid gas leakage. At the same time, gas appliances should be kept clean during use to avoid clogging. Regular inspection: Gas tanks should be inspected regularly, including whether there is any damage to their appearance, whether the valves are normal, and whether the gas pipes are aging.

3. Safety Valve: There is usually a safety valve on the gas tank, which will automatically open when the gas pressure is too high, releasing the gas and preventing an explosion. Therefore, do not adjust or close the safety valve at will. Storage method: Gas canisters should not be stored for a long time because the gas will corrode the metal and reduce the safety of the gas canister. If you need to store for a long time, you should empty the gas tank of gas.