Paper bag machine is the production of paper bags of industrial machinery and equipment, the production process mainly includes discharging, web folding, forming, cutting bags, gluing, folding the bottom, gluing the bottom, the finished bag output and other steps, the specific operation of the paper bag machine process is:
1, boot
(1) according to the requirements of the production notice on the film roll, adjust the size of the bag
(2)Install the heat sealing knife and adjust the position of slitting knife and heat sealing knife initially.
(2) Turn on the power, set the temperature of the heat sealing knife according to the requirements of the process document, and input the data related to the production of paper bags and the required number of each tie.
2, operation
(1) Start the main motor, low-speed operation, and then adjust the side position control to divide the film pair in the middle position.
(2) Adjust the left and right pinch rollers to align the left and right membranes, and adjust the front and rear pinch rollers to align the patterns.
(3) Adjust the heat sealing knife so that the heat sealing is within the required range of the paper bag.
(4) Adjust the slitting blade to the required position and adjust the perforation position to the scissor opening.
(5) Adjust the speed of the machine, take a flat out of the sample bag, for the initial inspection, if it does not meet the specified requirements, and then take a step of flat out of the sample bag for the heat sealing value test.
(6) the production of paper bags for the finishing inspection, the existence of folds, flowers, knife line, heat sealing of the bag is not secure and other quality defects removed, and bundled.
(7) The machine quality inspector carries out the inspection, and so on, after passing the inspection, affixes the certificate of conformity, and sends it to the quality inspection room for sampling.
3, stop
Disconnect the main power switch, and then disconnect the parts of the power switch, clean the machine and site hygiene, make a good record of the shift before leaving work.
4, packing
(1) the machine personnel will be qualified products bundled, handed over to the machine quality inspector for inspection, by the machine quality inspector on the number and quality of zhangzha inspection, to be qualified for the number of quality, according to the requirements of the box into the box, put into the packing list; selection of unqualified products are placed in the cardboard box with unqualified marking.
(2) machine personnel will be sent to the appearance of the products of the shift quality inspection room, the chief quality inspector of the products sent to the inspection in accordance with the prescribed ratio of sampling test, after passing the inspection, packaging and warehousing.
Second, the operation of the paper bag machine to pay attention to what matters
Paper bag machine belongs to the large machinery, the operation of the matters needing attention, including:
1, the operation of the paper bag machine personnel need to be trained to work on the job, the operation of the machine should be dressed in the necessary labor protection equipment, to avoid injury.
2, the paper bag machine needs to be checked before starting, the inspection items include whether there is dust and debris around the equipment, whether the machine is normally connected to the power supply, there is no fault display.
3, in the operation of the paper bag machine, the whole process should be guarded next to the machine, at any time to observe the bag-making situation found abnormal, immediate adjustment.
4, the paper bag machine need to shut down in time after use, and do the necessary cleaning work.