This method is: after the pot is stabilized, inject 20 ~ 30ml of water into the inner pot and turn on the power, so that the rice cooker can be heated without pressing the heating switch first, because the stabilizer inside is on. If it can't be heated, see if the indicator light is on. If so, the heating plate is faulty and needs to be replaced. If the indicator light is off or off, it may be that the stabilizer is not powered on, or the power cord is faulty!
When heating, because the temperature of the stabilizer is about 70 degrees, when the water temperature rises to nearly 70 degrees and the water begins to bubble (the temperature at this time is about 70 degrees), the stabilizer should be disconnected and heated after the water drops steadily. If you keep heating or not heating, it means there is something wrong with the stabilizer! These are all normal, you can press the heating switch. At this time, the temperature of water will rise to the boiling point of water. When the water boils, the pot temperature reaches about 103 degrees, and the heating switch should jump! Stop heating, or the magnetic steel is faulty! This process should be about 1 minute!