Supor rice cooker prompts e2 failure, which is generally caused by a problem with the temperature sensor inside the rice cooker. This kind of fault will cause the rice cooker not to heat and cook normally. Only by solving this problem can the rice cooker work normally.

Supor rice cooker prompts how to solve the e2 fault.

1. Unplug the power plug: first unplug the power plug, wait for a while, then reconnect the power, and try to start the rice cooker to see if it works normally.

2. Check the temperature sensor: If the first attempt fails, consider checking whether the temperature sensor is damaged or seriously damaged, and if so, consider replacing the sensor.

3. Cleaning the rice cooker: Clean the inner wall of the rice cooker to ensure that the inside is clean, because dirt and deposits may affect the work of the rice cooker, especially when heating food.

4. Carry out maintenance: If the above methods can't solve the problem, then some maintenance may be needed, and professional help may be needed. After fully understanding the situation, replace the faulty parts or carry out other necessary maintenance.

In short, when there is an e2 fault prompt in the rice cooker, corresponding measures should be taken immediately and corresponding maintenance should be carried out according to the specific situation. It should be noted that if used improperly, the life of the rice cooker may be shortened, so the standard operating procedures must be followed when using the rice cooker.