Soymilk machine makes pulp by controlling the water temperature. If it is a soymilk machine with a temperature sensor, the whole pulping time is less than 20 minutes under the condition of normal temperature water, and it is a little faster to add boiling water. It takes about 30 minutes for cold water and hot water to make a soymilk machine without a temperature sensor. In addition to the quality problem, the reason why soybean milk is not heated is that there is not enough time or the wrong function key is pressed. I suggest you check it carefully.

Generally, the process of making soybean milk by soybean milk machine is preheating first, then stirring, continuous heating, pulping, heating and finally slow fire. After the operation, the machine will give an audible and visual alarm.

Extended data:

Matters needing attention when using:

1, please don't get water into your nose;

2. Please cut off the power supply before taking it out or putting it into the nose;

3. When cooking soybean milk, put the machine where children can't touch it;

4. When making soybean milk, please add beans or other raw materials to the cup, and then add water between the high and low water levels;

5, Raphael net should be cleaned in time;

6. Please clean the electric heater, spill-proof electrode and temperature sensor in time;

7, please pay attention to the use of accurate methods when dismantling Raphael net, so as not to hurt people;

Baidu Encyclopedia-Jiuyang Soymilk Machine