Bag cutting and making:

Preparation materials: cotton and linen, scissors, glue.

Step 1: Cut two pieces of cotton and linen for the main body, as well as three pieces of side and base fabrics, all 400 cm in size.

Step 2: Cut and lay five pieces of 400cm cotton, and one piece of 400cm hard lining (used on the bottom of the bag), and glue them separately.

Step 3: Now make the loop of the lanyard. Cut a piece of solid-color cotton and linen. Fold one short side inward by 1 cm, and then fold the two long sides inward toward the middle.

Step 4: Machine-sew the tether loop to the solid-color cotton and linen on the side, with a distance of 5 (6) cm from the bag mouth. Pay attention to placing the short edge folded one centimeter inside; After sewing is completed, pass in the leather cord.

Step 5: Machine-sew the sides of the four pieces of bag body, join them into a square, and then put on the bottom.

Step 6: Let’s make the inner bag. Cut two strips of solid-color cotton and linen as the back part of the inner bag. The remaining size of the inner bag is one piece. Machine-sewing and splicing, install the inner bag according to personal habits. and zipper bag (be careful not to oversize, as the bottom and sides of this bag are both size 20).

Step 7: Sew the front and side edges of the inner bag, making sure to leave a reverse opening. Then take out 20 cm of the bottom of the bag and cut off the excess.

Step 8: Next, make the handle, cut two pieces of solid-color cotton and linen, and lay out two pieces of cotton; fold the solid-color cotton and linen in half first, glue the covering, and then fold the solid-color cotton and linen in half again. Sew both sides to complete the handle.

Step 9: Sew the handle on the body of the bag, aligning it with the edge of the theme cotton and linen.

Step 10: Place the outer fabric and inner fabric facing each other, and sew the bag mouth side; after reversing the back seam, sew the back seam with a hidden needle; arrange and iron it, and sew the bag mouth once Thread; install the magnetic buckle, I chose two magnets, wrap them in solid color cotton and linen and sew them in the middle of the return fabric, and the whole thing is complete.

Cutting precautions:

Confirm that the marker information is correct before cutting, and fix the marker on the laid fabric. Fixing methods include bead needles, adhesive tape, high-pressure clamps and pressure blocks. Check the condition of the cutting knife before operating, and keep the cutting knife clean, the blade sharp and in good condition. Operators generally hold the knife in their right hand and hold the fabric with their left hand, so they must wear special safety gloves with their left hand during the cutting process. Use even force when cutting to avoid passing or running the knife.