After a long time, the refrigerator is always covered with thick frost. Every time I clean the refrigerator head, it is a big knife, a shovel and a screwdriver. Maybe the refrigerator has been damaged.
How can I clear the frost quickly?
Reason one: The refrigerator temperature is too low.
1, the temperature of the refrigerator should be set between 4 and 8 degrees. If the thermostat is mechanical, the gear should be adjusted reasonably according to the seasonal temperature.
2. In summer, the gear should be set at 1-2, in spring and autumn 3, and in winter 4-5, and the freezer temperature should be kept at about-0/8 degrees. The temperature of the refrigerator is between 0- 10 degrees, preferably between 4-8 degrees.
Reason 2: the door seal is not tight or the door is opened frequently.
The door seal is not tight or the door is opened frequently for a long time, which will also lead to serious loss of cold air in the refrigerator; If the sealing strip is not tight, it should be repaired or replaced with a new door seal in time, and the number or time of opening the door should be reduced as much as possible.
Reason 3: The back wall of the refrigerator is deformed and bulged.
At present, the evaporators of refrigerators and freezers are all built-in, and Toshiba refrigerators are no exception. If the back wall of the freezer is deformed and bulged, it will be separated from the evaporator inside, which will definitely affect the temperature conduction, prolong the working time of the compressor and increase the power consumption.
What if the refrigerator freezes?
1, see if the temperature range is too high.
First of all, check whether the thermostat of the refrigerator works normally. If it works normally, we should adjust the thermostat temperature of the refrigerator to the middle of 3 and 4. Because the lower the temperature adjustment of the refrigerator thermostat, the icing rate of the refrigerator will increase. This is a good way to avoid the freezing speed of the refrigerator.
2. See if the sewer is blocked.
There is a drain pipe in the refrigerator. This drain pipe is relatively small. Some people may not notice it, and some people may not know its purpose when they see it. This drain will be blocked because it is not cleaned for a long time, so check whether the drain is blocked first. If it is blocked, clean the drain pipe first, and don't blindly clean the frozen part of the refrigerator. This is basically useless and will freeze again soon.
Tips for deicing refrigerator
1, deicing after power failure
This method is the simplest and most effective. Just take out the food in advance, then turn off the power to let the temperature in the refrigerator naturally rise, and the ice cubes in the refrigerator will melt, then take out the ice cubes and put them in the pool, and finally clean them with a dry rag.
2. Hot water method
Just prepare a few bowls of hot water, then put it in the refrigerator and close the refrigerator door. Don't worry about the damage of hot water to the refrigerator The low temperature in the refrigerator will soon cool the hot water. With the cooling of hot water, some ice cubes and frost in the refrigerator will slowly melt until they fall off. If some ice is thick, you need to change the hot water several times until all the ice pieces fall off.
3, hair dryer method
Simply put, it is to blow the ice cubes in the refrigerator with a hair dryer and warm air. This method is faster than hot water, but it also has disadvantages. Holding the hair dryer for a long time is very tiring, and you need to keep moving. Some hair dryers can't be used for a long time, the temperature is too high, and some families are not suitable.
4, natural thawing
This is actually to open the refrigerator door after power failure and wait for the ice in the refrigerator to slowly melt at room temperature. This method is slow, but it is the most labor-saving. Generally speaking, it can be melted in about an hour, which is relatively convenient. You can do other things while waiting for the refrigerator to melt.