Wall plastic gussets are a very popular wall decoration material. They are easy to install, beautiful and practical, and they also have the advantages of moisture-proof, fire-proof, and sound insulation. The following will introduce to you how to install plastic gussets on the wall.

1. Check the wall surface

Before installation, you first need to check whether the wall surface is flat and smooth. If there are undulations, cracks, and uneven places, they need to be repaired. In addition, it is necessary to confirm whether the wall meets the conditions of use to avoid quality problems during use.

2. Measure the dimensions

Use tools to measure the width and length of the wall. Accurate measurement is a critical step, because once the dimensions are inaccurate, it will affect the gusset plate. the overall effect.

3. Cutting the gusset plate

Mark the plastic gusset plate according to the measured size, and then use tools such as an electric saw to cut it. Pay attention to keeping the cuts neat to facilitate assembly. .

4. Fix the keel

Use fixing nails to fix the keel on the wall. This is a key step in the installation of wall gussets. The spacing between keels should be consistent, generally 50-70cm. A laser level can be used to adjust the level before fixing.

5. Connect the gusset plate

At the position of the keel, place the gusset plate at the corresponding position and insert it into the keel so that it can be perfectly combined with the keel. During installation, keep gaps between the gusset plates to facilitate ventilation and drainage. After fixing, use a hammer to tighten the gusset plate.

6. Attaching lines

In order to be beautiful and prevent pollution, aluminum alloy lines can be used to cover the intersections of the gusset plates and fixed with glue.

7. Cleaning

Finally, carry out cleaning work to remove the dust and garbage generated during the construction process to make the appearance of the wall gusset more beautiful.

The above is the installation method of plastic gusset plate on the wall. I hope it will be helpful to everyone. During the installation process, be sure to pay attention to safety to avoid accidents.