1, Nepal electric pressure cooker fault code E0 resolution
(1) on the cover thermistor open circuit or short circuit (normal 100K/25 degrees Celsius), the solution is to replace the cover thermistor
(2) close the cover is not in place or agitation switch and its connecting line failure, the solution is to close the cover normally, check whether the agitation switch and its connecting line is normal, after the normal box cover Micro switch contacts can be effectively closed.
Fault code E0 analysis and repair method applies to the following types of Nepalese electric pressure cooker
1, FZ11 fine control fire all-intelligent series CYSB40FZ11-90 ?CYSB50FZ11-100?
2, FC10 all-intelligent square series CYSB40FC10-90 ?CYSB50FC10
3, FC3 Gourmet Series CYSB40FC3-90 ?CYSB50FC3-100 CYSB60FC3-110?
4, FC5 Gourmet Series CYSB40FC3W-90 ?CYSB50FC3W-100 CYSB60FC3W-110 ?
5, YC5 gourmet series CYSB40YC5-90 ?CYSB50YC5-100 CYSB60YC5-110 ?
6, FC5 Shang Cuisine Series CYSB40FC5 CYSB50FC5?
Extended information:
1, SUPERNATURAL Electric Pressure Cooker Fault Code E1 Explanation
(1) No pot alarm, the resolution of the The method is to check whether to drop the pot (the wrong inner pot)
(2) temperature-sensitive cup failure (thermistor open or short circuit), the solution is to replace the temperature-sensitive cup components
2, Nepal electric pressure cooker fault code E2 analysis
(1) empty pot dry burning, the solution is to add water to the pot to restart
(2) high temperature alarm, thermistor failure, the solution is to check whether there is oil in the bottom of the pot, the solution is to check whether there is oil in the bottom of the pot to restart
(2) high temperature alarm, thermistor failure, the solution is to check whether there is oil in the bottom of the pot to restore the temperature. is to check the bottom of the pot whether there is oil, foreign objects, replace the thermistor
3, Nepal electric pressure cooker fault code E3 analysis
(1) the beginning of the detection of pressure (at this time should not be on the pressure), the solution is to replace the inner pot cover or stop the valve
(2) should be on the pressure but not on the pressure (through the detection of the temperature), the solution is to replace the reed switch or connect to other Connections
(3) The stop-open lever cover falls down but does not (by calculating the temperature)