Current location - Recipe Complete Network - Fat reduction meal recipes - What are the methods of making your own sewer unblocking agent using baking soda and how to unblock the sewer?
What are the methods of making your own sewer unblocking agent using baking soda and how to unblock the sewer?

As for the problem of unblocking sewers, everyone can learn about it. If there is a situation of unblocking sewers, it is recommended to solve it in time and choose the appropriate solution according to your own needs. If the sewer is unblocked, many friends will use baking soda to make their own sewer unblocker. So what are the methods of using baking soda to make your own sewer unblocker? How to unblock sewers? Let’s find out below.

How to use baking soda to make your own sewer unblocker?

How to use baking soda to make your own sewer unblocker: Prepare half a cup of white vinegar and half a cup of baking soda. Put enough water in the sink. Put both white vinegar and baking soda in it. You will find that a large number of bubbles are produced in the pool like a chemical reaction. You can see that the sink is much cleaner, so cleaning is really effortless. You can also make air freshening water with baking soda and lemon!

How to clear the sewer

There are oil stains, leftovers, vegetable stems, etc. accumulated in the kitchen sink, which can easily block the sewer. At this time, we can use Jianweixiaoshi tablets or Effervescent tablets solve clogging problems. First put one pill in the water outlet of the sink, and then use it to start flushing. If the blockage is serious, you can add a few more pills, and then keep using it to start flushing, so that the sewer will be unblocked soon.

1. You can pour a small bowl of soda ash at the mouth of the sink, and then add half a bowl of vinegar. Then the two will react chemically, and the oil and rust stains on the pipe wall will dissolve in about 4-5 minutes. . Then pour boiling water into the water outlet and rinse with hot water for about five minutes. The garbage and dirt in the sewer will flow away easily.

2. If it is only oil that blocks the sewer, we can use washing powder to clear it. Pour the washing powder into the sink outlet, then rinse with hot water. Rinse several times to remove the oil. If it is clean, the drainage will be smooth.

3. If you have a plastic soft straw at home, you can make it into a prop to clear the water pipe. Use scissors to cut small holes on both sides of the straw wall to make a soft hook. Insert it into the drain outlet and push it back and forth to bring out the hair and debris, so that the drain will be clear.

When you are unblocking the sewer, it is recommended to unblock it according to the location of the blockage, and also pay attention to the specific unblocking method. The above is about the methods of using baking soda to make a homemade sewer unblocking agent and how to do it. An introduction to sewer unblocking. When you unblock sewers, you should learn more about the relevant knowledge and pay attention to choosing the appropriate unblocking method.