Current location - Recipe Complete Network - Fat reduction meal recipes - How to install Win10 system with the old cabbage U disk installer tool?
How to install Win10 system with the old cabbage U disk installer tool?

One, U disk installation Win10 preparation:

1. First you need to download the Windows 10 operating system, divided into 32 located in the 64-bit version of the two, the computer memory is greater than 4GB users, it is recommended to download the 64-bit Win10 system.

2. Prepare a USB flash drive with a capacity of at least 8GB, and insert it into your computer. Note that in the following write iSO original Win10 image into the USB flash drive and make USB flash drive to play, will format the USB flash drive, so if there is important data on the USB flash drive, please pay attention to the first backup to the cloud disk or other computers.

3. Download and install the installer version in your computer, mainly to make a USB flash drive boot, as well as write the Win10 preview system to the USB flash drive.

4. Open the downloaded and completed installation of the installation version of the tool, and then switch to ISO mode, and then click on the following browse, find open the Win10 system image that we downloaded in the first step, and then finally click on the one-click to make a USB boot, as shown in the following figure:

5. Next, a pop-up box will be prompted, mainly to prompt you, the upcoming Win10 preview version image in the Write to the USB flash drive, and prompts you, write to the USB flash drive before the USB flash drive will be formatted, please pay attention to backup data. As I have already backed up the important data on the previous USB flash drive, so just click Yes, as shown in the following figure:

Patiently wait for it

6. After waiting for the progress to complete, you will see that the production of the USB boot success, and the original image of Win10 has been written to the USB flash drive, you will be prompted to whether you need to test it. In fact, there is no need to test, here directly click "No" can be, as shown in the following figure.

7. Finally, we can enter the U disk in my computer to view, you can see that the U disk capacity has used a lot of capacity, and it has been written in the system ready to install some of the files, as shown in the figure below.

So far, we have completed the iSO original Win10 system written to the U disk, and completed the U disk boot production, the next is to restart the computer, and then set the bios from the U disk boot, to the end is the Win10 installation process. The following we specifically to see.

Two, U disk installation Win10 graphic tutorials

a.) Restart the computer to set the boot U disk boot

U disk is still inserted in the computer, and then reboot the computer, boot press the Del key to enter the Bios setup, notebooks and desktops into the Bios setup U disk boot method is different. If you don't know how to set your computer to boot from a USB flash drive, please read the tutorial:

After you finish setting up your computer to boot from a USB flash drive and save it, your computer will restart, and then you can enter the Win10 installation interface.

b). Win10 installation steps officially started

1. Restart the computer, wait a while, it will pop up the Win10 installation interface, the first is to select the language, time and keyboard, here the default is Simplified Noon, as well as Microsoft Input Methods, we do not need to choose, directly click on the next step can be shown in the following figure

2. In the next In the next Windows installer interface, directly click Install Now as shown in the figure below.

3. Next, in the Terms of Service license, check the "I accept the terms of the license", and then click "Next", as shown in the following figure:

4. Then you will be prompted to choose which type of installation, it is recommended that you choose the "Custom" installation, the first upgrade installation method can also be, depending on their own choices, as shown in the following chart:

5. Next you need to choose which disk will be installed in Win10, here we choose to install in the system C disk, select the first system partition, click on the bottom of the "Next" to continue the operation, as shown in the figure below.

6. After clicking Next, you will be prompted to "If the selected partition contains previous Windows installation files, then these files and folders will be transferred to a folder named Windows.old, here we directly click on the following "OK" after, and then click Next. Then click on "Next" below, as shown in the figure below.

7. The next step will be to enter the official Windows 10 program installation, here you need to wait a long time, we wait for its completion, as shown in the figure below:

8. Waiting for the completion of the computer will be automatically restarted, the next are automatically complete the installation, we just need to wait for the automatic completion of the program, here we need to wait for a longer period of time, please be patient! The following diagram shows the completion of the installation.

win10 version of how to remove the watermark win10 version of the steps to remove the watermark

9. After a long wait, the computer will automatically reboot after the initial setup of Win10 interface, the first thing you see is to select the Internet settings, if you can connect to the network, you can connect to the network for the next step, there is no network of friends, you can continue to other following operation, skip this step.

10. The next setup is relatively simple, with detailed tips, we just need to follow the prompts, and then click all the way to the next step, know that the completion of the setup can be, first of all, the following here, it is recommended that the "custom" settings

11. The next setup, click all the way to the next step until the Create an account, as shown in the following chart:

12. All the way to the next step, the last local account settings are very important, that is, Win10 login user user, here we need to carefully fill in the computer's user name and login password, set the password to set their own easy to remember, because every time you boot up the back of the need to use this login password, set up and finished, click the bottom of the "Finish" can be. "Finish" can be. As you can see in the picture below.

After the account creation is completed, you will also see a prompt interface that is updating the app store, as shown in the following figure:

13. After the completion of the above, you can enter the Win10 system desktop interface