1 hot water in the refrigerator refrigerator will be bad

will refrigerator affect the life.

Hot water in the refrigerator is generally to cool down, although such behavior on the hot water is not much impact, but both from the point of view of the service life of the refrigerator or refrigerator food deterioration will cause a certain impact, hot water to put the refrigerator to save the refrigerator will make the temperature inside the refrigerator to rise quickly, affecting the state of the food inside the refrigerator to accelerate the deterioration of the food, but this behavior will not immediately cause the refrigerator deterioration.

2 hot water can be put directly in the refrigerator to cool down

It is not recommended to put directly.

Hot water is not recommended to put directly into the refrigerator to cool down the reason is that the hot water into the refrigerator, the refrigerator internal temperature will rise, so it is difficult to reach a constant temperature, and hot water is cold, the internal water will evaporate sharply, and then solidified in the internal evaporator, within a short period of time, will form a layer of thick frost, which will block the evaporator will be the internal heat transfer to the outside, resulting in the cooling effect is not ideal. The cooling effect is not ideal, so it is recommended to use other means to let the hot water cool down better.

3 hot water how to quickly become cold

You can put a cup of hot water into a container with a diameter larger than the hot water, pour the container into the right amount of water, and then add some salt, salt in the process of melting will absorb heat, can play a hot water cooling effect. Or to the hot water cup with the right amount of ice, ice in the process of melting will also absorb the heat in the water, so that the effect of rapid cooling will be better than directly to the hot water in the effect of adding cold water.

4 Refrigerator how to maintain a long life

1. Often clean up the back of the refrigerator or the bottom of the condenser and the compressor on the dust, available vacuum cleaner or brush dust, it is not recommended to use a wet cloth to wipe the dust.

2. When the refrigerator is out of service for a long time, you should cut off the power supply, take out the food in the box, clean up the inside and outside of the box, and open the door for a period of time, so that the box is sufficiently dry and dispersal of odors.

3. Check the refrigerator drain, if the drain is clogged, the water will leak into the refrigerator, with a wire to remove the accumulation of dirt in the drain.

4. Bleach diluted with 10 times the water, use a toothbrush dipped in wet cleaning of the door seal adhesive strip, and finally rinse off the bleach with water, the adhesive strip is dirty and easy to deteriorate, which affects the sealing of the refrigerator, and increases power consumption.

5. Check the vibration, noise, and temperature of the compressor, running touch the compressor shell, there should be no obvious sense of vibration, and should not be heard during the day, the compressor should not be obvious startup sound.