Current location - Recipe Complete Network - Fat reduction meal recipes - How to decrypt password on mobile phone
How to decrypt password on mobile phone

Question 1: How to crack mobile phone password on 4G mobile phone 1. If USB debugging is turned on on the phone, you can use flash software (such as Flash Wizard, Flash Master, Zhuo Master, Deep Flash, Qitu Flash, Bell Pepper ) to clear the lock screen password.

2. Enter Recovery mode for dual clearing

How to enter Recovery mode:

Method 1: If the phone is on, please turn it off first, remove the battery and then Install it. With the computer turned off, press and hold the power button and the Home button at the same time until the Recovery interface appears.

Method 2: If the above method cannot be used to enter, then turn on the phone again, first press and hold the volume button, and then press and hold the power button until the Recovery interface appears.

Recovery mode (power button to confirm, volume up and down buttons to move), the steps are as follows:

1. Shut down completely (it is best to pick the battery after shutting down), and then enter through a special key combination recovery interface.

2. Select wipe data/factory reset and press the power button to confirm, then select yes and press OK; then select wipe cache partition and press OK, select yes and confirm.

Question 2: How to unlock the password on Vetas mobile phone. If you forget the screen unlock pattern, you have five chances to try to unlock the phone. If that still fails, you can also enter your Google account username and password to unlock your phone.

1. On the unlocking screen, there are five opportunities to try to enter the unlocking pattern.

2. When prompted to wait 30 seconds, click OK.

3. If the screen turns off at this time, please press the power button to let the screen reappear, then press the control bar on the lock screen, and then slide your finger down on the screen to The screen is unlocked.

4. Click the Forgot to unlock graphic button in the lower right corner (when it appears).

5. Enter your Google Account name and password, then click Sign In.

You will then be prompted to create a new screen unlock graphic. If you no longer want to use the screen unlock pattern to protect your phone, tap Cancel.

If you unlock N times by mistake, the "Forgot to unlock" graphic button will not appear;

Solution:

1. Download and install "Wandoujia Mobile Genie" to the computer;

2. Open the C8650 and connect the USB data cable to the computer;

3. Install the C8650 mobile phone USB driver;

4. Open "Wandoujia" "Mobile Wizard";

5. Click "Application Games" in the menu bar, then click "System Applications" on the "left", you can see that some programs installed by default on the phone appear in the middle;

6. Scroll to the top, click to select "Android System", and then click "Uninstall" in the upper part;

7. At this time, there will be a program on the mobile phone to obtain the ROOT of the mobile phone. (Highest authority) prompt, click "Return" according to the prompt;

8. When the phone returns to the green background screen of "Wandoujia Guardian Elf", click "Turn off USB mode". Unplug the data cable;

9. At this time, the phone will skip "Graphic Unlock" and return to the desktop;

10. Click "Settings" - "Personal" - "Account" on the mobile phone and "Sync"-"Add Account", enter a GOOLGE account (if you don't have one, register one on your computer), and wait for the synchronization to complete.

11. Turn off the phone and restart it. If you try to enter the wrong unlock pattern 5 times, the "Forgot to Unlock" graphic button will appear;

12. Click the "Forgot to Unlock" graphic button. Enter the GOOGLE account and password from step 10, and then you can reset the new unlock pattern.

The last resort is to restore factory settings

Method: Press the volume down button when the phone is turned off, then turn it on, and then press the volume down button again after entering the screen. Note that personal information on the phone will be lost

If you really can’t handle it yourself and don’t want to restore factory settings, please contact after-sales service.

Question 3: How to unlock the phone if you forget the power-on password. Method 1: Enter the recovery mode of the phone, clear the data and restore the factory settings. This method will restore the phone to its factory state, and all personal data, information, contacts, and applications on the phone will be lost. If there is important data on the SD card, please remove the SD card from the phone before operating.

When the phone is turned off, press and hold the volume up button and the power button at the same time, wait for the phone to display a red exclamation mark, and then release the button

2. Release the button after the screen lights up, and wait for the display to appear The screen below, if it does not appear, please repeat the steps;

3. Use the volume and volume - keys to adjust the highlight bar to "wipe data/factory reset", which means "wipe data and restore factory settings", and press the power button Confirm;

4. Use the volume and volume-keys to adjust the highlight bar to "Yes, delete all user data" and press the power key to confirm;

5. Wait for a while until the On the screen, select "reboot system now" to restart the phone and press the power button to confirm;

6. Wait for the phone to restart and enter the system. Enter the password and enter the system directly. Try it now!

Method 2.

1. Download the flash wizard on the computer

2. Connect your phone to the computer through the data cable, pay attention to your u * here ** The debugging mode should be turned on. If it is not turned on and you cannot enter the system, use the method below. Then open the flashing wizard. At this time, if you have not installed the mobile phone driver, you will download and install the driver yourself. It should be noted that if the driver installation fails (at least mine failed), it is recommended to download Wandoujia, because I personally think Wandoujia’s driver is relatively comprehensive.

3. After the driver installation is completed, it will be connected to the mobile phone.

4. The phone is connected, look for utility tools in the driver wizard, and look for clear lock screen password in utility tools.

5. Please download the attachment for more details

Question 4: How to decode the password on an Apple phone. It is recommended to back up the content on the phone before restoring it, because this method requires a new recovery for the Apple phone. system, so all the data on the phone will be lost. iTunes software is required here. If it is not installed on your computer, please go to Apple's official website to download and install it first:

apple//itunes/download/

2

Next, please connect your Apple phone to your computer, open the iTunes software and click on the iPhone icon in the window, as shown in the picture

3

Then please click on the Click the "Backup Now" button and follow the prompts to back up the data on your phone, including address books, text messages, photos, etc.

END

Step 2: Restore the system of the Apple phone

After the data backup is completed, please press and hold the power button of the Apple phone. The shutdown option will appear. Afterwards, slide to power off.

Next, please follow the steps below to put your Apple phone into recovery mode:

① Press the power button to turn it on, the Apple logo will appear on the screen, do not release the power button;

②. Then press and hold the Home button until the screen goes black;

③. When the screen goes black, please release the power button and continue to hold the Home button without releasing it;

After successfully entering DFU recovery mode, you will see a Connect to iTunes logo on the screen of your Apple phone.

Note: If you cannot enter recovery mode at one time, please try several times.

At this time, iTunes on your computer should prompt that an iPhone device in recovery mode has been detected, as shown in the picture

4

Then click on the iTunes window "Restore iPhone" button as shown in the figure

5

At this time, iTunes will connect to the network, detect the latest firmware system applicable to the current Apple mobile phone, and prompt us if Restoring will delete all data on the phone. Click the "Restore" button to continue, as shown in the figure

6

Then wait patiently for iTunes to automatically download the firmware from the Internet and restore the firmware system to the phone. When the recovery is complete, follow the prompts step by step to activate the phone.

Question 5: How to crack the mobile phone password lock? This is difficult to crack by yourself. Find a mobile phone repair place and spend a few dollars to hire professionals to solve it.

Please accept it, thank you!

Question 6: What should I do if I forget the unlock password on my smartphone? First check what system it is. If it is Android, there are 3 ways to solve the lock screen password on Android phones. Way to forget!

Method 1: ADB unlock click to download the ADB unlock tool

Necessary condition: USB debugging mode is on (MIUI system is on by default)

1. Mobile phone connection Computer, make sure the ADB driver is installed (method:), unzip the ADB toolkit to the C drive

2. Open cmd and enter cd c:\adb (open the directory where adb is located)

3 , then enter adb shell

4. Continue to enter cd data\system

5. Enter ls to view the files in data\system. If a password is set, there will be gesture.key or password .key

6. If you set a pattern password, please continue to enter the command: rm gesture.key. If you set a simple password, please enter the command: rm password.key

7. Enter the reboot command or manually restart the phone to take effect, or slide to unlock now. Any password can be unlocked. It is recommended to reset it.

Method 2: Unlock Google account

Necessary conditions: Before the machine is locked Set up and log in to a Google account, the account password is known, and the phone can connect to the Internet.

1. Enter the password 5 times at will. The system will prompt 5 incorrect inputs. Try again after 30 seconds;

2. At this time, the bottom of the unlock interface will prompt "Forgot Password", click to enter. The previously set Google account and password can be unlocked immediately.

Method 3: Clear data to unlock

Advantages: No restrictions, suitable for users who do not have important information.

1. Press and hold the power button and volume up button at the same time when the phone is turned off to enter recovery.

2. Select Simplified Chinese - Clear Data - Clear User Data, and restart the system. This operation only deletes the user data and the software is retained.

If it is Wp, there is no solution. If you are satisfied, please adopt it!

Question 7: How to unlock the phone with the digital password. If your phone has forgotten the password for some reason and cannot be unlocked, you can refer to my other experience "What to do if you forget the lock screen pattern" To perform the unlocking operation, enter "What should I do if I forget the lock screen pattern" in the search box at the top of this page to search.

2

If you set a mobile phone lock screen password and you can remember the password, you can unlock it in the following ways. If you set up a sliding pattern to unlock, you can press the phone's power button to activate the screen, and then slide the screen to unlock with the pattern you set previously.

3

If you have set a digital password to unlock before, for the same operation, you need to press the power button of the phone or other buttons that can activate the phone screen, as shown in the figure. You need to enter the numeric password in the text box to unlock it.

4

Enter the previously set numeric password in the text box and then touch and click the "ok" button on the interface. The operations are similar on different mobile phones, depending on your mobile phone. Different, as shown in the picture, it can be successfully unlocked.

5

If you have previously set a password unlocking method that uses a combination of numbers, letters, and characters, you still need to perform the same operation. First, press the phone's power button or other buttons that activate the phone screen. As shown in the picture, you need to enter a password mixed with numbers, letters, and characters in the text box to unlock it.

Question 8: How to decrypt the password if it is not a smartphone? If the phone is turned on, then you can download a JAF or NNS online and use software to unlock it (by the way, search for tutorials online). If the phone is turned off, , try hard formatting, format the phone, and restore the appearance parameters. If it doesn't work, you have to go to customer service~

Question 9: How to set the unlock password for the phone? Settings-gt; General-gt; Password lock-gt; Open password-gt; Enter your own password-gt; ok

Question 10: Forgot the mobile phone password, how to unlock 75 points Android phone graphics unlock password forgot what to do? Choose from three unlocking methods

Forgetting the phone unlock password and graphic password has become a problem that motorists often encounter. At the same time, many users are helpless when forgetting their passwords. Here, the author provides you with three solutions to delete forgotten lock screen passwords. There is always one suitable for you!

Unlocking method one: Flashing

Re-enter the ROM. It can eliminate the password lock you set. This method may be a little complicated for those who don’t know how to flash the phone. If you can flash the phone, it will be much simpler.

Please refer to the flashing tutorial

Unlocking method two: double wipe

Double wipe is also called double W. From the professional perspective of flashing enthusiasts, it can be considered as an operation of erasing mobile phone data. The more professional answer to what wipe means is: wipe means restoring factory settings, including deleting all contacts, text messages, installed software, etc. Commonly known as hard reboot, restoring factory settings. Note: app2sd and root permissions need to be redone after wipe. Moreover, the important partitioning steps of app2sd must be done again. Double wipe means double wipe means clearing cache and memory data.

Now that you understand the meaning of wipe, you should know about Shuangqing. Now that the phone has been restored to factory settings, the password lock set will naturally be cleared. This operation is relatively simple, but it may have an impact if there are important files on the phone.

Please refer to the double clear operation steps

Unlocking method three: use adb to delete the forgotten lock screen password

Operation steps:

1 Connect the mobile phone to the computer without opening the data connection and do it in charging mode.

2. After decompressing adb.zip on your computer, place the adb file in the root directory of the computer's C drive.

3 Perform the operations in the picture and delete the *.key file.

4 Enter adb reboot or manually restart the phone to take effect.

adb download address

legouji/article.php?id=3068