Exercise 1:

Step 1: Prepare 12 small wooden sticks with the same length and assemble them into a basic lantern rack. If there is no connecting plug in the picture, you can connect the sticks with a strong rope, and then wrap the thin linen that you don't want at home around the frame and stick it on the bracket.

Step 2: Fold a piece of red colored paper in half, and then draw a favorite pattern on the sealed side, such as fish, rabbit and love. Then draw some simple patterns in it and cut them along the edge. Stick the cut pattern on the outside of the lantern, and then wrap ropes around the opposite sides of the bracket, and you can hang it!

Exercise 2:

Production steps:

1. Put the bamboo in the steam room for half an hour, then take it out and put it in a cool place to dry, but it should not be excessively dried or exposed to strong light. Scrape the rough surface of bamboo with a bamboo plane. Cutting bamboo strips with required length; This depends on the size of the lantern. The weaving method completes the lamp holder in a cross way. In the middle of the lamp holder, tie several bamboo rings on the lamp wall. ?

2, paste (install) lanterns, first paste cotton gauze, and then paste two layers of lantern glossy paper. If there is no glossy paper, fine cotton paper will do. ) stick cotton gauze, brush the diluted paste evenly on the surface of the skeleton, and then gently stick the cut gauze on the lamp holder.

Then brush the paste flat with a brush. It should be noted here that the brush used for leveling the paste must be a clean brush, otherwise the lamp surface will be messy. At the same time, the pasted paper must be pasted without seams in order to be truly pasted.