Dimensions of drawer slide rail Installation method of drawer slide rail
Dimensions of drawer slide rails
The slide rail of a drawer is a groove or curved guide rail fixed on a certain track for other movable parts of the drawer to move.
Generally, the dimensions of drawer slide rails are: 10 inch, 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, 22 inch and 24 inch. You can install different sizes of slide rails according to different models and sizes of drawers.
1. First, assemble the five panels of the drawer and tighten the screws. The drawer panel has a slot with two small holes in the middle for installing the handle.
2. To install the drawer slide rail, it is necessary to disassemble the rail first, install it on the drawer side plate in a narrow way and install it on the cabinet in a wide way. During installation, the lower part of the slide rail is laid flat under the drawer side plate, and the front part is laid flat in front of the drawer side plate. Everyone should distinguish between before and after.
3. Install the cabinet. Screw the white plastic hole on the side panel of the cabinet first, and then install the wide rail removed from it. A slide rail is fixed one by one with two small screws. Both sides of the cabinet should be installed and fixed.
Installation method of drawer slide rail
Dimensions of drawer slide rail Installation method of drawer slide rail
1. Generally speaking, the drawer slide rail adopts three hidden slide rails. Please determine the length of the drawer and the depth of the counter according to certain data, so as to choose the corresponding size and install it on the drawer. 2. Next, assemble the five plates of the drawer, screw on the screws, and the drawer panel will have a slot. After processing, put the drawer on the installed drawer to make the holes of the adjusting nails match, and then push the locking nails into the locked drawer and slide rail. 3. Finally, install the cabinet. At this time, it is necessary to screw on the plastic hole on the side plate of the cabinet first, and then install the track removed from it. The slide rail is fixed one by one with two small screws. Need to be reminded that both sides of the cabinet should be installed and fixed. 4. After the drawer slide rail is installed, align the two ends of the movable rail (inner rail) on both sides of the drawer side plate with the two ends of the fixed rail (middle rail), and then gently push it in, you will hear a slight click, indicating that the movable rail and the fixed rail have been linked, and the drawer can be pushed and pulled freely.
The above is the installation method and size of drawer slide rail I introduced, I hope it will be helpful to you.