Whether the kitchen sink is selected correctly or not largely determines whether the kitchen is good or not. After all, the frequency of using the sink is much higher than that of other kitchen appliances and kitchenware. You may not cook often, but you will use the sink more or less.

However, although the kitchen sink is very important, most people don't care. They think that the sink is just a basin, as long as it can be filled with water. As a result, the right sink is not selected, which greatly reduces the use experience.

How to choose the kitchen sink? For example, what does it mean to have a single trough and a double trough, or a basin above the platform and a basin below the platform? What should I pay attention to when shopping? In fact, these are the only aspects you should care about. Don't think too much about others.

First, the number of sinks Kitchen sinks are divided according to the number and combination, which can be divided into these types: single trough (small single trough, large single trough) and double trough (double trough of the same size, one large and one small double trough).

It is also a single trough. There is only a difference in size between a small trough and a large trough. The small trough is below 650mm and the large trough is above 850mm, so the large trough can put the pot in, while the small trough can only wash the chopsticks and spoons.

These two kinds of single tanks, one is suitable for small-sized kitchens and the other is suitable for large-sized kitchens.

Double tanks, as the name implies, have two tanks, which are distributed left and right. As for the combination of tanks, it can be one large and one small, or it can be the same size. No matter what kind of double sink, it can be effectively partitioned when used, but generally speaking, double sinks of the same size are not convenient for washing pots, so the double sinks of one big and one small are more in line with our living habits.

Of course, if the overall size of the sink is large enough, even if it is double-grooved, the small sink can wash the pot, but it should be noted that the faucet is best to choose the pull-out type, otherwise the size of the sink is too large to ensure that every corner of the sink can be flushed with water.

In the choice of the number and size of sinks, it can be said that it is fair and reasonable, and the old woman is reasonable. Some people think that a single sink is good, which is convenient for washing large kitchen utensils and saves space. Some people think that a double sink is good, which can effectively partition and is more convenient. Personally, I think we should choose according to the kitchen conditions and personal habits:

If the kitchen area is limited, choosing a double slot will only lead to two smaller slots, so it is inconvenient to get up, so it is better to choose a single slot. If the area is relatively large, you can choose either a single slot or a double slot, depending on your personal habits (one large and one small double slot is more in line with our Chinese living habits).

Second, the installation method sinks are classified according to the installation method, which can be divided into upper basin, middle basin (flat embedded) and lower basin. The so-called "upper, middle and lower" is actually the position comparison between the top of the sink edge and the cabinet countertop.

The basin on the table, the top of the edge of the sink is on the table, and the sink is supported on it by the table. Therefore, the advantages of the basin on the table are firm and firm, and the installation is simple and convenient, but also because of this, the joint position between the sink and the countertop is easy to shelter evil people from evil practices, and the glass glue is easy to yellow and mildew, so it is not easy to clean and take care of it.

Taichung basin, sink and countertop are flush, the transition is more natural, not only solid, but also not easy to hide evil and shelter evil people from evil, and easier to clean. However, the installation of Taichung basin is a test of the master's installation technology. If the joints are not done well, it will still shelter evil people from evil practices, so the installation is the most difficult, time-consuming and expensive.

The edge of the basin and sink under the platform is directly hidden under the countertop. The biggest advantage of such a sink is that it is easy to clean and take care of, and it will not hide evil people, but the disadvantage is that it is difficult to install and it is not solid.

In the choice of sink, it needs to be considered in combination with personal situation and countertop situation. For example, if you choose a basin on the countertop, you should pay attention to the usual cleanliness; If you choose Taichung Basin, you should have enough budget and find a professional master. Choose the basin under the table, the weight of the sink should not be too heavy, and pay attention to the material and thickness of the countertop.

Third, the material of the sink The common materials of the sink are: stainless steel, stone (artificial stone, quartz stone, acrylic, etc.) and ceramics. The three materials have their own advantages and disadvantages:

Most sinks are made of stainless steel, which is durable, wear-resistant and corrosion-resistant, easy to clean and cost-effective, but the style is single; Although the artificial stone sink has a high face value, it is not wear-resistant, difficult to clean, expensive and heavy, so it is not recommended to choose the lower tray.

In recent years, the ceramic (slate) sink is very popular, which has higher face value, stronger durability and easier cleaning, but the price is also higher. Unless the budget is sufficient, it is not recommended for ordinary families.

Fourth, the sink technology

The process of sink is divided into two kinds: manufacturing process and surface treatment process. These two kinds of processes, * * *, determine the quality and aesthetic degree of sink.

The manufacturing process can be divided into two types: integral stretch forming and manual welding. The two manufacturing processes, one is stamped by machine mold without welding seam, and the other is manually welded, each of which has its own advantages and disadvantages:

The integrated stretch-formed sink is cheaper because it is made by machine and has no weld, and it will not leak water. However, the sink formed by machine stretch-formed is thinner and often has lower face value, which is suitable for families who pay attention to practicality or general budget. Hand-welded sink is durable, with higher face value and more space, but it is more expensive and easy to leak (with higher manual requirements), which is suitable for families with pursuit of face value and sufficient budget.