The specific feeding method is as follows:

1. Feeding water quality: the water temperature should be between 24℃ and 27℃; The pH value of water is neutral water, and the pH value is 6.5 ~ 7.2. It is best to keep the dissolved oxygen at 5 mg/L. In addition, attention should be paid to controlling the content of other substances in water quality. The standards are: 0 mg/L, 0 mg/L nitrite, 5 mg/L nitrate, 0 mg/L ammonia and 0 mg/L phosphate.

The second is feeding management: pay attention to feeding frequently and keep the regularity of fish life.

3. Container for raising betta: There is no special restriction, but due to the aggressiveness of betta, it is recommended to raise betta alone. In addition, some necessary decorations and equipment placement are needed to provide the best living environment for betta fish to grow. A layer of clean thin bottom sand or colored sand can be laid on the bottom of the fish tank, and the ratio of water to bottom sand is 5: 1. You can also plant some aquatic plants, and it is best to configure a small lamp with soft light in a small glass jar.

Fourth, clean the water tank; Every 3 ~ 7 days, plastic hose should be used to remove the excrement and dirt at the bottom of the water tank by siphon method, and about 1/3 sewage should be extracted and injected with dechlorinated tap water. Because there is no power equipment in the small aquarium to drive the water circulation, it is necessary to pay attention to remove the oil film on the water surface formed by residual bait and feces at any time.

Five, feeding: can cooperate with feeding all kinds of bait, such as harvest worms, dragonflies, silkworms, water fleas and so on. Can make betta more colorful. However, because most of these baits contain bacteria, they must be washed when feeding, and each feeding amount can be eaten within 5 minutes, so feeding can be done once.