Current location - Recipe Complete Network - Food recipes - Manual method of discarding cans.
Manual method of discarding cans.

how can you turn waste into treasure? Pop cans can be DIY into many handicrafts by hand, but many people don't know how to operate them. Today, I will bring you some hand-made methods of turning waste into treasure by using cans. Children can also try them ~

Let's take a look at these hand-made steps!

1

Converting cans into airplanes

Making airplane models with cans

Preparation materials: cans, hand drills, cardboard, computer supporting color printing, glue, scissors, hand painting, gloves, disposable chopsticks and hot melt adhesive.

After you have prepared these DIY supplies, you can start to work.

Let's take a look at how the propeller plane model made of turning waste into treasure was born!

download and print the drawings and samples of all parts of the propeller plane in color according to the required scale on the computer.

Glue the printed drawings to cardboard, and then cut the cardboard of each component of the propeller plane along the pattern outline on the drawings with scissors.

spray the surface of the cans with hand paint to light blue or other colors you like, and drill a small hole in the middle of the bottom of the cans with hand drill.

Use disposable chopsticks as the rotating shaft of the propeller, and install the propeller

Install the tail wing

The upper and lower two pairs of wings are supported by rectangular frames

The completed propeller airplane model

Is it very simple after reading it

2

Converting cans into lanterns

Preparation materials: beverage cans, knives and scissors.

manufacturing steps:

this step will be a little dangerous, so don't let children do it.

cut off the inside of the upper opening of the beverage can with a knife.

Use a ruler and a knife to draw the cans with the same width and the same height vertically.

Pay attention to leaving a part at the upper and lower ends of the can wall, and don't scratch it to the end.

Then we can slowly cut each lane with a knife.

If necessary, we can use a knife. Then use scissors to cut it open

This will reduce some risk factors

You can slowly push out the middle parts by hand and bend them into lanterns

After finishing, A lantern is born

4

Making mini potted cans

Preparation materials: cans, potted soil, colored rope, double-sided tape, toothpicks and colored paper

Manufacturing steps:

Stick four double-sided tapes on all sides of cans

Wrap cans with colored ropes

Wrap cans with ropes of another color. Cut off the extra rope with scissors

put the soil into the can

put the cactus or cactus

cut the colored paper into dovetail strips with scissors

stick the toothpick on the paper with double-sided tape

insert the toothpick into the soil

hand-made DIY beautiful mini cactus potted plants in the can!

you're done! Is the colorful can potted plant particularly beautiful?