Methods/steps
First, the apple crab.
1. Cut the apple vertically into three parts, and the two sides can be cut slightly thinner.
2. Put the right one flat, cut it from the middle, and then cut it into even thin slices, and remove the smaller ones.
3. Cut the middle 2/3 vertically, cut out two V-shapes with a knife, and then make two crab claws from the middle.
4. Take the one on the left, poke two small mouths at one end with a knife, and insert apple seeds as eyes.
5. As shown in the picture, an apple crab is ready.
Second, 30 seconds to turn a small tomato into a small rabbit.
1, cut a knife at about 1/5 next to the small tomato.
2. Cut a small piece from the middle of one end and cut it into a V shape.
3. Put the big cut down on the chopping board, and then cut it diagonally about 1/3. The incision should be deep, but don't cut it off.
4. Put the V-shaped piece cut in step 2 into the bevel cut.
5. Punch two small holes with toothpicks as eyes, and a lovely tomato rabbit will be made.
Third, oranges and crabs.
1, peel off the orange peel with a flat knife hob, and cut the orange peel into two slightly pointed shapes with scissors.
2. Carve patterns on the surface of orange peel with a flat knife tip.
3. Separate the cut orange peel.
4. Take one-eighth of the orange and cut a small mouth at each end. 5. Insert the cut orange peel into the small mouth.
Question 2: How to make small animals with fruits and vegetables? A vine twists and turns, hanging a string of pearls, purple and green are really beautiful, and ripe sweetness is sour. Look what this is. This is a grape.
Grape is like a purple diamond, big and round, and sometimes it shines. It tastes sour and sweet. In summer, it hangs on the branches, making people salivate at the sight, and they can't help but pick one and put it in their mouth.
When the grapes are not ripe, the skin of the grapes is emerald, like jade, crystal clear. Every autumn, when the grapes are ripe, the skin will turn purple. There are many kinds of grapes, about 8,000 in the world and more than 500 in China.
Grapes come in different sizes and colors. Under the big green grape leaves, there are strings of crystal clear grapes, purple, green and round. Gently push open the grape skin and the grape pulp will appear in front of your eyes. The flesh is translucent and looks like a round gem. It's sour and sweet in the mouth. Grapes are not only delicious, but also rich in vitamin C. Grapes have many uses. They can be made into raisins, processed into various cakes and made into delicious and sweet wine.
Question 3: How to make small animals from vegetables and fruits? Cut them with a knife instead of glue.
Question 4: Pictures of small animals made of fruit.
Question 5: In fact, the easiest way to make a small fruit animal is to put it out in the shape of a rabbit, which is clean and practical ~
I wish the baby a healthy growth, and Ma Bao will always be beautiful, hehe.
Question 6: How to make a simple and beautiful small animal fruit platter? Rabbit origami shows the folding method of vertical-eared rabbits: 1. First, prepare a square piece of paper, here is white paper. If white paper is used, fold the white side and a pair of opposite sides. The crease is the position drawn by the pencil in the picture. 2. fold in half. 3. Fold it in half to open it, and fold it in half to the middle of the two sides, forming two creases in the figure. 4. After folding, fold the two short sides in half. 5. Just like this. 6. After opening, fold a short edge to the position of the middle crease, thus forming the crease of pencil drawing. 7.8.9. Open the product in the previous step and fold the two corners of the short side to the midpoint of the crease formed in the previous step. 10. After opening, unfold the corners of the short sides and make them according to the creases made in front, but the oblique creases make mountain marks here. 1 1. After the two corners of the short side are completed, that's it. According to the position of the crease on the way, the angle formed by folding is folded to the position of the vertex angle. 12. Just like this, fold the model in half according to the middle crease. Complex three-dimensional rabbit origami illustration 13. Fold two corners by connecting one side to the midpoint of the short side at the quarter position. Fold down the upper half of the line connecting the lower right corner and the left triangle, that is, the midpoint marked when the front part is marked with a quarter, but only the lower half. 14. Only the lower part is folded. 15. 16. After the left and right sides are folded in half, the creases made are as shown in the figure. The lower part of the crease remains motionless, the upper part is folded in half, and the back part is also folded in half. 17. What it looks like after folding. Fold the right part to the left at the position of the black line in the figure. This black line is the connecting line between the lower corner and the upper end of the crease that once existed on the upper side. 18. This is what the inside looks like after folding. 19.20. After completion, fold the outer layer of the upper corner to the bottom at the crease position marked by pencil in the drawing. 2 1. Fold the front, rear and lower left parts inward, and then fold the ear parts twice at the position drawn by the pencil in the figure. 22. That's what it looks like when it's finished. 23. Fold the lower edge of the ear inward, which is what it looks like inside. 24. This is what it looks like outside. Then, according to the position of the crease drawn by the pencil, turn the corner of your mouth up. 25. Then fold it to the upper corner and then fold it to the position of the previous crease. 26.27. Then, keep folding the horns of the tail. 28. Flip an edge inside the front and look inside the model, so that you can easily find this edge. 29. Then, fold back and forth continuously to make rabbit's feet. The requirement is that the length of the front foot needs to make the rabbit and the back horn stand on the same plane, so as to stand firm. 30.look inside. The crease in the picture is to fold the two corners in half, so that the rabbit's foot is fixed. 3 1 .. Here, fold the edge turned out in front of the origami rabbit in step 29 so that the part where this edge is located cannot be seen outside. 32. The rabbit's eyes keep closing, then its ears open, and the origami rabbit is finished.