Lead: Nowadays, many families will put a dining table dedicated to eating in the kitchen, and match the dining table with several chairs for daily eating. However, it is easy to spill some food when eating, which leads to the confusion of dining table and dining chair. At this time, it is an excellent solution to put a dining table cover and chair cover on the dining table and chair, which not only solves the problem of food overflow, but also has low cost. The following is a detailed introduction to the manufacturing method of Bian Xiao dining table and chair cover, as well as the manufacturing method of cushion and back cover.

Table cloth making

Actual size of the table:135cm * 80cm.

1. Cutting: a piece of165cm *110cm grid cloth and a piece of13cm wide cloth.

Pure cloth: a piece of cloth with a width of 13 cm.

2. Burr the long grid cloth.

3. Align the long plain cloth with the long grid cloth for sewing without pleating.

4. Align the sewn cloth with the rectangular grid cloth, pleat and sew, and one pleat seam is 12 stitches.

5. Sew the hem part to lock the edge.

Cushion cover making

Seat size: 40cm * 40cm

1. Cutting: grid cloth: 45cm*45cm four, 45cm*50cm four, 5cm*30cm sixteen.

Lining: 45cm*45cm four, 45cm*50cm four.

Pure cloth: four strips, width 15cm.

2. Sew the back of the grid cloth with the lining, and perform line pressing treatment to sew four large grid cloths and four small grid cloths.

3. Cut the large grid, install a 40 cm long zipper, and then cut it to the size of the small grid.

4. Deburr one side of the pure cloth strip.

5. Sew a 5 cm * 30 cm mesh cloth into a bandage.

6. Sew the strap to the front of two pieces of grid cloth, and lock the edge after sewing.

7. Pleat the pure cloth strip and sew it with zipper, with 6 stitches for each pleat.

8. Sew lace fabric with 45cm * 45cm fabric.

9. Sew the stitched three sides.

10. Open the zipper and insert the cushion core in turn.

Manufacture of chair back cover

Seat back size: 39cm*52cm

1. Cutting: grid cloth: eight strips, width 10cm.

19cm*54cm four, 16cm*40cm four and 9cm* 1 1cm four.

Pure cloth: eight long strips with a width of 10cm and four strips with a width of 75cm*45cm.

Lining: 75cm*45cm set.

2. Sewing 75cm * 45cm pure cloth with lining.

3. Burr the strip pure cloth.

4. Sew long plaid cloth with long pure cotton cloth without pleating.

5. Pleat and sew the sewn cloth and pure cloth, and lock the edges.

6. Sew both sides of the pure cloth and lock the edges.

7. Make other squares into butterflies and sew them on pure cloth.

Conclusion: Through the above introduction, I believe that everyone has a certain understanding of the production method of dining table and chair covers, as well as the production method of cushions and matching. Every family will have a set of dining table and chairs. Installing protective covers on dining tables and chairs is a very good way to prevent tables and chairs from getting dirty. It not only has low cost, but also has obvious effect. You can even make some dining table and chair covers by yourself with some discarded clothes at home. I hope the above introduction in Bian Xiao can help you understand how to make dining tables and chair covers, and how to make cushions and chair covers.

Tubatu Online provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8 to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~