First, the production of canned food.

1, find one first;

2. Pull out the pull ring of the can so that the one-dollar coin can barely fit into the hole. At this time, you can use a utility knife to expand along the hole.

3. It can be completed after expansion;

4, you can also find cans, without destroying the pull ring, cut a long strip at the top with a utility knife, enough to put down coins.

Finally, you can cut a long strip on the side of the can, and then put down the coin.

Second, the production of acrylic board

1. First, prepare enough acrylic boards;

2. Draw a line on the wood square, stand up and aim the line at the center point to find 60 degrees, mark it, draw a trace on the line, draw a coin mouth and drill a hole;

3. Make a hexagon with six sticks, draw the outline on the template, cut it out, stick the pattern on the board, and draw the outline with an awl.

4. Draw with a pen, draw the outline of the wooden frame on the acrylic board, draw it repeatedly with a hook knife, and then polish the edge with sandpaper;

5, a layer of wood wax oil for protection, dry, and screw the acrylic board to the wooden frame.