The so-called phototherapy nail, that is, phototherapy resin nail, is a new nail lengthening technology. Once the resin used is cured by ultraviolet radiation, it will not fall off or be defective. Do a phototherapy resin nail and keep it intact for at least three weeks. After the nails grow out, just add a layer to the newly grown part.

Besides, it is superior to crystal nails, because it has no bad smell and won't damage your nails. The final nail is transparent and shiny, just like nature. Even those who are not easy to grow nails because their nails are relatively fragile can enjoy the happiness of growing nails without damaging their original nails. These characteristics of phototherapy resin nails make the plasticity of nail modeling improve instantly.

The above advantages of phototherapy manicure are very popular with customers, but some customers will become warped after wearing phototherapy manicure. Below, I will explain in detail the operation steps and precautions of phototherapy manicure:

The commonly used materials of phototherapy nail art are: phototherapy glue, extension glue (white, transparent and colorful), model glue, coagulation liquid (sealant), washing water and non-woven fabric.

Commonly used tools are: phototherapy pen, finger sleeve, nail clipper, abrasive strip, bean stick, phototherapy lamp.

Operation flow of phototherapy nail

First of all, we should pay attention to one point: the detachable phototherapy glue and the non-detachable phototherapy glue should be used separately, otherwise it may lead to the cracking of phototherapy nails, thus shortening the original time.

First, trim nails: too long nails need to be cut short and trimmed, and about 1MM real nails should be left on the paper tray, because too long nails will cause the paper tray to lie down and cause glue to flow.

Second, peeling off dead skin: Unclean removal of dead skin will affect the durability of phototherapy nails.

Third, engraving and grinding: gently polish the nail surface with a frustrated strip until the nail surface is dull, and be careful not to touch the skin at the rear edge of the nail.

Fourth, cleaning: wipe off the dust and grease on the nail surface with cleaning gel water, so that the phototherapy nail can last longer.

5. Priming: The detachable phototherapy nail uses the detachable primer, and the non-detachable phototherapy nail uses the anastomosis agent (i.e. the non-detachable primer). The ultraviolet lamp is irradiated for 2 minutes, and the LED lamp is irradiated for 60 seconds.

Before using the primer, it is necessary to know whether the primer needs scrubbing, some primers need scrubbing and some primers don't need scrubbing.

Take our company as an example. After the lights are turned on, we need to scrub the removable primer, but we don't need an anastomosis agent.

Sixth, paper tray: make it in the shape of a paper tray (arc). When placing the paper tray, pay attention to that there is no gap between the paper tray and the nail, and it matches the real nail.

7. Apply model glue: detachable phototherapy nails use elastic detachable extension glue (that is, detachable model glue), and non-detachable phototherapy nails use non-detachable model glue. Pay attention to take the glue clockwise.

1, detachable (elastic detachable extension glue):

(1)uv lamp: come out for setting after 2 minutes; (2)LED lamp: come out for setting after 60 seconds.

Note: You must turn on the light again after the new shape appears. )

2, non-removable (transparent, pink, pink, skin color, French model glue, three-in-one glue):

(1) UV lamp: 1 min, shaping (2)LED lamp: 30 seconds, shaping.

Note: You must turn on the light again after the new shape appears. )

Eight, cleaning: polishing and finishing the foundation nails.

Nine, phototherapy color glue, style: all kinds of color glue and some special phototherapy glue (such as gradient extension glue) are among the choices, and it is also necessary to pay attention to the corresponding glue selected in the early stage, which is detachable and not detachable.

10. Apply a layer of model glue to strengthen the phototherapy nails and make them smooth.

XI。 Polishing: Pay attention to the strictness of polishing technology, and don't wear the finished style.

Twelve. Cleaning: Use clean gel water again to remove dust and grease.

13. Seal coat: You must wait until the cleaning gel is dry, otherwise it will have fog and foam. Like primer, it is necessary to know whether the sealing coating needs scrubbing before sealing.

14. Finish: After finishing, you can choose a layer of nutrient oil to moisturize the skin around your nails and prevent the formation of dead skin.

In this way, another manicure was born, so take a photo as a souvenir!

Pay attention to the following details during operation:

1, dead skin must be cleaned thoroughly.

2, nail surface degreasing should be thorough.

3. Polishing should be in place and dust removal should be thorough. Do not touch the nail surface after polishing, especially the back edge, that is, around the nail groove.

4, phototherapy glue should not be applied to the skin on the edge of the finger.

5. Seal the jacket in place and pay attention to the wrapping.

6. As for the yellowing problem, the timing of illumination is not well grasped. Each lighting time is two minutes (120 seconds). Finally, the sealing coating should be illuminated for four minutes. When polishing, the thickness of phototherapy nails should be well controlled. Excessive polishing can cause phototherapy nails to tilt.

7. Glue should be evenly spread, and adhesive and sealant should be as thin as possible. When applying glue, the phototherapy glue should be driven in a "Z" shape, and the pen should be stable to avoid sticking to the skin.

Correct operation process, use qualified products and pay attention to the above details in the operation process, then the finished phototherapy nail will not rise, yellow or break without great external force.