The installation method of a single gas stove is relatively simple. The following are the specific steps:

The first step is preparation.

Before installing the gas stove, it is necessary to check whether there is natural gas and whether the pipeline is unobstructed. You also need to prepare some tools, such as rubber pads, wrenches and windpipes.

The second step is the installation position of the gas stove.

When choosing the installation location, it is necessary to consider whether the location of gas pipe and power socket is appropriate. Generally speaking, it is necessary to choose a well-ventilated location more than 20 cm away from the wall. At the same time, if it is an embedded gas stove, enough installation space needs to be reserved.

Step 3, connect the gas pipe.

Before connecting the gas pipe, you must open the natural gas valve, insert the gas pipe into the nozzle, and then fix the gas pipe by the method.

The fourth step is the connection of the air throat.

After connecting with the gas pipe, it is necessary to connect the gas throat to the gas stove. When fixing the air throat, it is best to tighten it with a wrench.

Step five, connect the fire line.

Connect the ignition wire to the gas stove and fix it with a wrench.

Step 6, install the gauze on the cooker.

It is necessary to install positioning screws on the gas cooker, fix the mesh on the cooker, stick a rubber pad on it and tighten it with a wrench.

Step 7: Test the machine.

After installation, it is necessary to check whether each connector is fastened, and then turn on the test button to test the machine and check whether the gas stove is ignited normally.

In a word, the installation method of single gas stove is relatively simple to operate, just pay attention to whether the joint is fastened. If you are not familiar with this, please ask the installer to assist in the installation to ensure your safety.