Maintenance of the sealing machine: into the sincerity of the moon cake custard pastry sealing machine

Sealing machine that is the heat sealing strip or electric wire or heating tube and other wear parts, these wear parts with a few years is ultimately to be replaced, as for maintenance, as long as the usual correct operation of the machine basically can be used for many years. (For reference only)

Precautions for sealing machine:

1, not applicable to metal containers and metal mounted cover, not to mention can not be placed on the metal table to press the start button, otherwise it will damage the machine.

2, before the power must be inserted into the induction air plug, and lock the screws.

3, the use of single-phase three-wire power cord, for the safety of the operator, be sure to use a single-phase three-wire power outlet, the workplace floor must be dry to maintain the insulation. 4, equipped with automatic protection against overheating, when the temperature inside the machine is overheating, the buzzer inside the machine long "abnormal protection (PRO. MD.)" Yellow indicator light, at this time you should turn off the power switch, to be cooled down in the machine buzzer stops, and then continue to work.

5, the work process should often touch the surface of the sensor head, check whether overheating, such as found hot hands should stop heating, to be cooled down and then work (cooling can not turn off the power), "ready (WARM UP)" green indicator does not light up, please do not press the start button, in order to avoid triggering by mistake. Please turn off the power switch on the panel when the machine is finished working.

6, equipped with a fuse of 5A, can not be replaced by a fuse larger than 5A.

7, there is a high pressure inside, the bottom plate is charged, it is strictly prohibited to repair privately, so as to avoid personal electric shock.

8, before use, if found to have exposed wires should stop using the machine, to be repaired before use.

9, equipment transportation, storage, use can not be impacted, heavy pressure, moisture.

10, product inspection and acceptance of unpacking, in the case of normal transportation, packaging intact, such as the zero part of the product found to be inconsistent with the packing list should be promptly contacted the company. 11, according to the instruction manual, the use of the operation should be clearly understood in advance, such as the discovery of the product manufacturing quality problems, within the specified period of time to the company to explain the warranty of six months of the equipment and is responsible for the maintenance.

Note: The machine is equipped with a limit current protection, when the sealing aluminum foil area is too large, or too close to the inductor coil, the output will be automatically shut down, the buzzer in the machine will beep, and the panel of the "abnormal protection (PRO. MD.) yellow indicator light, until the recovery.