Peeling is the most headache, the most difficult, the most laborious, the most tiring process for root art authors. In the process, I y feel: the skin is good to peel, tough skin is difficult to remove, lumps in the most difficult to do. This should be "according to the root of the appropriate", different nature of the root to take different peeling methods. According to my practical experience and my root resources, briefly introduce two kinds of tree root peeling method:

First, the rain and sunshine method which is the use of "moisture up and dry shrinkage" principle, to promote the separation of bast fiber and xylem. For those after the rain, sun, wind and not deformed, not cracked roots or shrub roots (for example: jujube roots, tsubaki roots, tung tree roots, unique pear roots, jujube roots, etc.), it is best to put in the open air, let it wind, sun, rain, let it dry naturally. After a summer, the wood dries out, the root bark cracks, and the bast fibers separate from the wood, and then the root bark is peeled off with a knife that is not too fast, which is clean, smooth, and maintains the pattern and grain on the surface of the wood. In particular, the root of sour date and the root of one pear is more prominent, may wish to try.

Second, blistering method of rotting and degreasing method. For those who are easy to change shape and crack the roots of trees and shrubs, such as the mother pear is very (also known as Hegeling), prunus root, etc., it is best to put in the live water soaking 4 to 6 months, which can promote the decay of the root skin, but also to prevent the change of shape, cracks, insect moths. Soak every one to two months to turn over a check, depending on the degree of root skin rot and decide to soak time, to skin rot easy to fall off as well, while wet to peel off the skin, and then placed in a cool place to cool and dry, do not expose to the sun.

How to peel tree roots

You have enough time to soak or use a high-pressure water gun!

How to peel freshly dug roots without cracking

Fresh roots without cracking:

1, for fresh roots, first of all, wash off the soil on the roots.

2, and then completely soak the fresh tree roots into the water for a year, during which time you need to change the water at intervals, 2 months or 3 months to change the water once, the wood in the inside out, and then fished out in the water cellar to dry. This way it does not crack. The sawdust pushed out of the wood treated in this way with a planer is crushed surface. If the launch is shavings, a roll of a roll is not dealt with, continue the above process, until the planer launched to the sawdust is crushed surface can be.

Tree roots how to peel

Buy a high-pressure rinse pump can be, buy remember to tell the boss you are rinsing the bark with, because there are many varieties of high-pressure pumps, of course, such as just one or two wood can be submerged in water for about a month up and down on the fish, so that it is easy to take off the skin

How to deal with the damage to the bark and tree roots?

In the transplantation of large trees, generally more cranes or excavators to assist, the traditional operation is to use a wire rope with a protector lifting the trunk or trunk and mud ball lifting at the same time. Because the protection is easy to fall off, a little careless, the bark or roots may be wire rope or mechanical damage.　　　　 Solution: 1. Tree nutrient transport speed of tens of centimeters / hour, once the bark is broken, will make the cortex and xylem in the middle of the nutrient transport break, thus affecting the survival or growth of seedlings. Therefore, the bark should be protected from damage as far as possible, prevention-oriented, with a sling instead of a wire rope, and use hemp and bamboo sheets to wrap the trunk.　　　　 2. For the bark block buckling or partially off, you can first disinfect the bark, restore it to its original state, immerse it in trunk-infused liquid, and then tie it with grass rope or hemp sheet, wrap it tightly, and repeat it at intervals with trunk-infused liquid, and disinfect it again with a sprayer in about a week.　　　　 3. If the bark is completely detached, paint the wound with wound dressing and tie it with grass rope or hemp sheet.　　　　 4. In case of root damage, prune the bad roots first, and then seal the wounds with a wound dressing to promote healing and prevent nutrient loss. After planting, water the roots with a diluted solution of Energizer, because Energizer root watering solution also has an antibacterial effect, so it can promote wound healing, and promote the development of new roots.　　　　 Key points: 1. Prevention first.　　　　 2. Timely treatment and good maintenance.

A friend sent the roots of the tree has just finished processing the bark, we see how ......... 10 points

Wow, great. Carve again and it's ok.

How to prevent cracks after peeling large roots for root carving, how to prevent cracks in root carving coffee table

The easiest way to prevent cracks in root carving coffee table is to dry naturally and then processed into a coffee table, and then painted after the finished product.

What to do when the skin of a tree root bonsai is broken

Use a wound healing agent or soil to wipe down the surface.

Taobao: Shengshi Xinyi Botanical Garden, business Japanese leafy spring, nodal white wax, water wax, boxwood and other bonsai, reasonable price, more carefully cultivated. Soil plant fertilizer, wigwam accessories (animal figures houses bridges, etc.), succulent ornaments, gardening utensils and other supporting complete. All full 26 yuan free shipping, full 50 yuan free gift. A view of the world, a stone.

After years of deep processing and pruning cultivation of bonsai, easy to survive for a long time, and has artistic value. Shengshi Xinyi Botanical Garden's bonsai masters have more than 30 years of cultivation and planting pruning experience, careful maintenance of each potted plant, have a certain artistic merit.

A variety of shapes, unique (straight pole type, oblique pole type, cliff type, stone folder tree attached to the stone type, landscape bonsai, wigwam peaks, everything)

Fertilizer (hydroponics king, king of large fertilizer, cake fertilizer, compound fertilizer, dwarf Zhuangxin, etc. a full range of varieties)

How to get rid of camphor roots on the skin

Camphor root skin does not need to be removed, it is necessary to pay attention to is the bark! Cracking, should face up to this problem, should not blindly give it indiscriminate application of medicine. In the process of observing the balsam fir bark cracking, it should be noted that the degree of bark cracking, if only the peripheral skin of the chaffing, which is a natural phenomenon that is bound to happen after the camphor grows up. If the camphor tree appears different from the growing bark cracking, you should pay attention to whether it is affected by the outside world or disease. In short, found that the balsam fir bark cracking, should be timely to find the reasons for the emergence, and timely repair of the bark cracking phenomenon, to give the balsam fir tree a better growing environment.

Analysis of the causes of balsam fir bark cracking

The phenomenon of bark cracking is very common, the causes of bark cracking are manifold, now on the balsam fir bark cracking reasons for a simple analysis:

1, caused by the balsam fir bark cracking the most common is the natural growth of balsam camphor tree, that is, the peripheral skin of the chaparral

Because of the trunk of the formation of the layer of cells to produce new cells, the trunk grows thicker, the trunk grows thicker, the bark of the tree is more than a few days, and the bark is more than a few days. cells, the trunk grows thick, the bark can not wrap the trunk, then the balsam fir bark cracking, shedding phenomenon, after a period of time will grow a new periderm, then camphor tree grows a circle, which is the natural phenomenon of the growth process of balsam fir tree.

2, the relative sufficiency of moisture leads to cracking and peeling of the bark

In the summer period of May and June due to more rain, the trunk of the balsam camphor tree is quite sufficient moisture, too much moisture in the trunk, the balsam camphor tree lifting, loading and transporting the process of easy to lead to cracking and peeling of the bark, this is because of relative sufficiency of moisture in the trunk of the process of being squeezed by the sling so that the bark slides and moves, then there will be a cracking and peeling of the bark, which will lead to cracking and peeling. This is because the trunk moisture is relatively sufficient in the process of the sling extrusion makes the bark sliding shift, then the phenomenon of balsam camphor tree peeling.

3, the lack of moisture will also lead to the cracking of balsam fir bark

When the lack of moisture in the balsam fir tree, to a large extent, because of the lack of the ability of the roots of the tree to absorb water, but the balsam fir tree belongs to the branches of the transpiration of exuberant species, which to a large extent leads to the cracking of the bark of the balsam fir tree.

4, balsam camphor tree transplantation will also lead to cracking and shedding of its bark

Especially in the summer transplantation process, the summer plant water transpiration is more exuberant, in the tree transplantation, the tree's root system is damaged, resulting in insufficient water absorption, it is difficult to achieve a balance of nutrient income and expenditure, which will lead to balsam camphor tree bark cracking or shedding.

5, summer high temperature will also lead to the cracking of the balsam fir bark

Summer sun exposure, so that the balsam fir bark water loss, resulting in a serious lack of water in the epidermis of the tree, which will lead to cracking or peeling of the bark.

6, termite damage caused by bark cracking

Termite is one of the pests suffered by balsam camphor tree, it is more serious damage to the balsam camphor bark, mainly harming the bark of balsam camphor, the trees were infested with termites, the formation of an ant road, if serious, it will lead to serious cracking or even peeling of the bark.

Recovery of balsam fir bark

The above mentioned causes of balsam fir bark cracking and peeling are manifold, we should pay attention to the phenomenon of balsam fir bark cracking and peeling, and find a way to make the bark recover in time, so that balsam fir trees can grow healthily.

On the balsam camphor tree transplantation process led to the shedding of the bark, you can use soft cotton cloth or grass rope for the trunk winding, especially on the sling lifting place to be especially well protected. Bark cracking and peeling caused by water shortage of balsam camphor tree, to ensure that the tree's water absorption, timely water to the balsam camphor tree, that is, hanging water, in the morning and evening on the tree for the whole plant spraying to keep the moisture, but also with plant regulators to close the stomata, reduce water transpiration, so that after a period of sustained maintenance, the phenomenon of cracking and peeling of the bark will disappear. The bark cracking and peeling caused by high-temperature sun exposure, not only should start from the sun, but also from the trees to maintain moisture, through the construction of sunscreen net to minimize the exposure of the trunk, morning and evening to ensure that the photosynthesis and air absorption of trees, sunscreen measures at noon, and then is to prevent exposure to sunlight resulting in water loss, timely irrigation of trees to achieve the protection of the tree bark to mitigate the cracking of the bark and peeling. For the termite attack on the balsam fir bark, you can apply medicine on sunny days after rain, the termites are all nesting activities in the soil near the root and neck of the infested plant, digging up the topsoil of 5-10cm can see the termites, digging up into a ring ditch, ditch width of 20-30cm, sprinkle the granular agent of furadan of 5-10g/plant, and then the topsoil backfill, burying the furadan under the topsoil. Then it is to destroy all the mud shells made by termites on the balsam fir trunks with tools, so that all the termites on the trunks go back to the soil. If the soil is dry, water first, then sprinkle the medicine, in order to facilitate the rapid dispersion of the active ingredient of the medicine in the soil, which can prevent the termites from attacking the bark of the tree, so that the bark of the balsam fir tree can be well restored.... >>

How long does it take for the roots to dry out after general skinning!

How long it takes to dry out after cutting down a plant depends on the water content of the plant itself and the rate of evaporation. The water content of a plant is determined by itself, and the rate of evaporation is related to the temperature, humidity and flow rate of the air. Therefore, how long it takes for roots to dry out after general barking is greatly influenced by the rate of evaporation.