2. Fold a triangle on both sides
3. Fold it again on the basis of the above picture.
4. After opening the folded paper in the above picture, fold it in half in the middle according to both sides of the folded paper in the above picture.
5. Fold both sides of the paper in.
6. For the sake of intuition, this is the reverse shape of the above picture.
7. Folding the paper as shown above is actually putting it away according to the crease, and both sides are the same.
8. Now let's use one side as a demonstration. First, fold the triangles on both sides against the top corner.
9. Put down the triangle folded in the above picture and turn it into two squares.
10, and then fold two adjacent sides of two small squares against the middle line, and fold both sides.
1 1, the folded shape of the above picture is pressed down and expanded, and this effect is achieved.
12, after both sides are folded according to the above steps, the expanded drawing is this effect.
13. Fold down the extra paper at the bottom, and the result is as shown in the figure. Fold the extra tail inside and a heart-shaped origami will come out.
14, the extra tail is folded in as shown in the picture to fix the two sides of the heart, otherwise it will open. If you want to use it as a bookmark, you can also choose paper that is twice as long as the width, so there will be no extra paper.
15, the final product is like this. In order to make the steps more obvious, the paper I chose has a contrast on both sides, and the effect may not be satisfactory. It will be better to fold it out with some beautiful drawings.
How to illustrate the method/steps of DIY gift box method
1
First, measure the size, length, width and height of the package with a ruler, mark the data, and cut it into squares with scissors paper
2
Then center the gift box, merge the top of the wrapping paper together, and stick it with adhesive tape or double-sided tape.
three
The extra faces are folded in half first, and then the extra parts are folded into triangles. Fix it on the gift box with double-sided adhesive.
four
Fix it again with beautiful transparent adhesive tape to ensure that there is no gap in the wrapping paper and it fits the gift box.
five
Finally, use the ribbon, draw out the bow, and fix it above the gift box with double-sided tape!
END
matters need attention
The first time you pack a gift box, you will be more novice. If you pack it several times, you can master it skillfully!
How to DIY the birthday gift box method graphic method/steps 1 First, measure the size, length, width and height of the package with a ruler, mark the data, cut it into squares with scissors paper, then center the gift box, merge the top of the wrapping paper together, and stick it with tape or double-sided tape! 3. Fold the extra faces in half first, and then fold the extra parts into triangles.
How to do DIY paper folding gift bag? Does the landlord have to do it himself?
First of all, you have to consider what kind of gift to pack, and then decide what shape to make a gift bag according to the gift. You can go to the gift shop and choose some beautiful colored paper to make your own designed gift belt! If the landlord wants some personalized gift bags, I suggest you go to those websites that are customized in creative gifts, where the gifts are more creative. I hope the landlord can find a gift bag that satisfies him!
How to illustrate the method of DIY gift box to make storage boxes from empty cartons
Preparation materials: all kinds of empty paper boxes (such as cans, moon cakes, biscuit boxes, toothpaste boxes, etc.), patterned wrapping paper, English newspapers, cardboard (used to increase the thickness inside).
A The storage box made of tissue paper box is just the right size for storing old tapes and other sundries.
B, a long toothpaste box, packed in English newspaper, can be used as a pen box with an inner box. It is a good sealing method to sew buttons and sealing lines at the opening.
C, add two drawers to a rectangular paper box with a long box of cosmetics as an inner box to make a jewelry box, which can accommodate earrings, necklaces and other small accessories.
D, three empty aluminum foil bags, cut open the box mouth, cleaned, dried, and pasted into a whole, which can be placed on the desktop as a stationery box ...
Unique jewelry boxes are handmade.
The unique jewelry box looks very creative and exquisite, and its predecessor is just a finished milk box!
Preparation materials: small milk box, beautiful wrapping paper, a small piece of paper rattan, pearl board, corrugated board.
1, cut the milk bottle mouth, and fold the four sides of the milk box into the above shape by pressing the edges.
2. Cut the favorite wrapping paper into long strips and stick them on each side.
3. Draw the size of the box mouth and cut out a square box.
4. Lining the thickness of a pearl plate in the box cover.
Empty cans of potato chips are used to make storage cans and multi-purpose pen holders.
Materials needed to make this pen container: empty cans of potato chips and colored wrapping paper.
A, the top half with plastic cover is sealed at the bottom and decorated, which is an elegant storage tank.
B, the lower part was originally a complete cylindrical jar, just need to package it, that is, it becomes a pen container.
Hand-made vertical shelf
Keep the original shape of the milk box and stack it into a vertical shelf.
Materials required for DIY production:
4 long milk cartons, wrapping paper and photo glue.
1, first remove the bottom of the milk box as a basic part of the shelf.
2. Cut the milk carton diagonally and fold it into a triangle, as shown in the figure.
3. The finished triangle, as the base of the shelf, can make the whole body slightly inclined upwards, which is convenient for storing articles and not scattering.
4. After the bottom seat and the three basic shapes are packaged, they are stacked and bonded one by one, and you are done.
The production of creative CD racks with natural, rough and original flavor.
Materials to be prepared for making this creative work:
Corrugated cardboard (if the thickness is not enough, you can use two layers or add a layer of cardboard to increase the firmness) and branches of the waste paper box.
Manual production method:
Cut the corrugated cardboard on both sides with a width of about 37.5px at equal intervals, and then insert the branches to adjust the angle, and the CD rack can be completed.
Insert the CD horizontally into the incision on both sides, and put the album name outward for easy searching.