Method 1: fisherman's knot.

1. The ropes overlap for a section, and each end of the two ropes is tied with a common knot.

2. Tighten the two ropes.

Method 2: Knot the clothesline.

1 Draw a circle in the middle of the rope.

2. Grasp the two fingers at the bottom and turn them clockwise twice.

Then, put the rope at the top through your finger and tighten it.

More knotting methods:

1, semijunction

Introduction: The basic knots of all knots.

Purpose: To prevent slipping, or as a temporary way to prevent the thread from falling off when the end of the rope is opened.

Disadvantages: When the knot is too tight or wet, it is difficult to untie it.

2. splayed knot

Introduction: The play is simple and easy to remember.

Usage: It can be used as a temporary or simple stop and braking point on the rope.

Features: even if the two ends are pulled tightly, they can still be easily untied.

Step 3 tie a knot

Usage: Tie the two ends of the same rope together. Suitable for connecting ropes with the same thickness and material; But it is not suitable for ropes with rough and smooth surfaces.

Features: once the winding method is wrong, the result may become an incomplete slipknot, and the knot will spread when stressed. If the knot is pulled too tightly, it will not be easy to untie; However, if you hold the end of the rope with both hands and pull it hard on both sides, you can untie it easily.

Secret: Left and right, left and right.