First, to use software that is not authorized by Apple, you must first jailbreak.
Prison break depends on cydia and the latest cydia substrate (formerly known as mobile substrate)?
Because the latest cydia substrate has just been updated, many people can't find it (can find it and ignore it). In this case, directly installing the cracked application will lead to the phenomenon that the app restarts and disappears, especially for the 64 processor.
Find cydia base (cydia base language has been installed, no need to change. Skip to step 3? )
1, find the language option in the ipad general settings, and change the language to English. Waiting for a reboot.
2. Open cydia (the interface is no different from the Chinese version). Wait a moment, Cydia will prompt for an update. I can't take your picture because of my update. You'll see later.
3. Update cydia
Then look for this installation as shown in the Cydia Substrate Cydia (with its own source code) (the picture is in Chinese, just like in English).
4. Do not change the language after installation. You can find iFile installation on cydia homepage.
After the installation, you can change the language.
5. Well, the preparations are finished, so let's get down to business. Before that, please restart your ipad?
Second, connect the USB flash drive
1, connect your USB flash drive to the ipad with a data cable. The first time, you may be prompted that something is not supported, so ignore it all.
Open ifile? Enter the interface
Click on the side twice to enter the following figure.
Extended data:
Precautions:
1, you can't read power-consuming disks, such as mobile hard disks, and USB flash drives with lights are not necessarily (some can).
2. Is there any blue screen death in this process? The risk of restarting. But it won't cause the ipad to turn brick.
3. This tutorial is only for people who like tossing, and the consequences are at your own risk.
4. After successfully reading the USB flash drive, only MP4 and mov videos in the USB flash drive can be played, and other formats are not supported.
5, the operation should be standardized and correct
Usb interface allows hot plug, but it must not be plugged or unplugged when reading or writing data. If you do this lightly, the data will be damaged and the chip will be damaged. If you are not sure whether you are reading or writing data, please disconnect by safely deleting the hardware. If you still can't delete the USB flash drive safely, it is recommended to unplug the USB flash drive after turning it off to avoid forcibly pulling it out, otherwise some adverse consequences may occur.
6. Carry it safely.
Pay attention to protect the USB flash drive when you take it out. If you put it in your pocket at will, especially in the back pocket of your pants, it will be easily squeezed and deformed when you sit down. In severe cases, the circuit board will be broken, resulting in hidden trouble. Therefore, it is recommended not to put it in a place that is easy to be squeezed.
7. Keep the USB flash drive clean.
If you use usb for a long time, sometimes there will be a lot of dust or dirt. If not cleaned, it will lead to poor contact and poor data transmission. The electrical contacts of the card reader are finer. If there is dust or rust in it, there will be inexplicable failures after connecting with the computer. Please note that dust particles on the plug will also wear the contacts. Shorten the service life of the socket. So be sure to keep the socket clean.
8. The plugging and unplugging method should be correct.
Try not to use too much force or swing up and down too much when plugging and unplugging the usb flash drive, because the USB interface is flat and thin. Shaking up and down is easy to damage the circuit board in the machine, or the plug and circuit board will be soldered off. If it is too user, it will cause poor contact, resulting in data transmission errors or even unusable, so pay attention.
9. Do not insert the USB flash drive into the computer for a long time when not in use.
If you often plug the U disk into the computer, it will be harmful to the service life of the U disk if it is powered on for a long time, and it is easy to be accidentally damaged when it is inserted into the front panel, so it is recommended to pull it out and put it away when not in use.
10, don't touch the transmitted data.
After connecting to the computer, do not try to touch the USB flash drive during data transmission, because poor contact may lead to data errors in an instant.
1 1, pay attention to the influence of temperature rise.
The electronic chip in the USB flash drive is very small, especially the small SD card or mini SD card is smaller, and the heat dissipation problem will be noticed. If it is used in summer, the temperature will be higher, and the temperature rise of flash memory will be higher when writing data. If the USB flash drive has a large capacity and many files to write, it will take a long time to continue writing. At this time, the temperature rise will be relatively large. In order to prevent the chip from overheating and damage, it can be written intermittently in sections if necessary, giving the accumulated heat a chance to dissipate.