The maintenance of walnuts is actually very simple. It can generally be divided into several steps: cleaning, priming, and getting started. Base color, as the name suggests, "lays the foundation color." The reason why this base color is important is that it will affect the color of the walnuts. Laying a good base color is half the battle. The correct steps for priming Wenwan walnuts are as follows:
1. First, prepare the cleaning tools for walnuts before priming, including hard-bristled nanobrushes, soft-bristled nanobrushes, small steel brushes, bristles, gloves, etc.
2. With the tools ready, start cleaning the walnuts. Use a hard-bristle nanobrush to brush off the remaining dust on the surface of the walnuts.
3. Finally, use a fine soft-bristled nano brush to rotate and brush out the remaining pulp deep in the walnut.
4. After brushing the walnuts, but before getting started, wear gloves to play with them. Gloves are relatively soft and have better polishing and cleaning effects. Glove disc play is not only the base stage, but can also be used with sweat discs for long-term cleaning and polishing.
5. Finally, use a boar bristle brush to polish for a while, so that the base of Xinwenwan Walnut is ready.
Extended information:
Wenwan walnut cleaning method:
1. Cleaning in the water
New walnuts are basically cleaned simply Yes, there will inevitably be some pulp residue and dust floating on the surface. At this time, some friends will put the walnuts in water and soak them before brushing them, or put them under the faucet and brush them.
This does make the walnuts clean very quickly, but the danger of cracking ensues. Only walnuts that have just emerged from the green skin need to be cleaned in water, and they need to be dried slowly in the shade. Do not cause the pulp to crack before it nucleates, which is very sad.
2. Steel brush cleaning
The steel brush is an artifact of cleaning. Whether it is Wenwan walnuts, small walnut bracelets, or Rudraksha, you can use a steel brush to clean stubborn stains. Although steel brushes are good in many ways, their use is not without taboos. Steel brushes are not suitable for use over a large area and for a long time. Excessive force may first damage the cortex. Secondly, the electroplated layer will adhere to the surface and gaps of the cortex, making it difficult to Clean up.
You can use a steel brush to clean the local area slowly. The dirt on the surface of the walnut is not as difficult to remove as imagined. When the pulp residue deep in the gap is difficult to clean and the brush cannot reach it, you can use a toothpick dipped in water and stir it in to clean it smoothly.
3. Nano brush cleaning
The bristle brushes on the market have different prices and shapes. The hair colors are mainly yellow and black, but black bristle brushes have the risk of fading. It is recommended that Wenwan Walnut use a nano brush during the base stage. The effect is very good and there is little hair or color loss. Wait until the initial patina of the walnuts is colored before you consider replacing it with yellow bristles.
If you must use black bristle, be sure to buy a good quality one to avoid dyeing your beloved walnuts into strange colors. It is best to clean a new bristle brush with hot water before use and let it dry before use.
4. Glove bottoming
People are tall, short, fat, and thin, and their hands are dry and sweaty. Some friends have extremely sweaty hands. The hand holding the walnuts will also sweat when brushing the walnuts. It is easy to ignore it. This will cause the white walnuts to come into contact with sweat prematurely, which is detrimental to the priming work and may even cause color difference. It is recommended that friends with sweaty hands choose to wear gloves when applying base to prevent excessive sweat from having a negative impact on walnuts.