How to adjust the electronic scale if it is not accurate?
1, confirm whether the battery is charged.
Check whether the battery of the electronic scale is sufficient. If the battery is dead, it should be replaced in time. Insufficient battery will also lead to inaccurate display of the electronic scale. In actual use, 60% of electronic scales are often unable to start or have low power. When the power is low, the electronic scale will react slowly or read incorrectly. Therefore, the battery must be replaced in time (and only high-quality batteries can be used according to regulations). However, if you don't use the electronic scale for a long time, please take out the battery to prevent the battery from leaking and damaging the electronic scale.
2. Confirm whether it is placed incorrectly.
The electronic scale should be placed horizontally on the floor, but if the electronic scale is high and low at one side, or there is an elevation angle with the horizontal plane, it will also lead to inaccurate scale weight. Before leaving the factory, the electronic scale passed the calibration on the horizontal table, but when the customer uses it on the uneven or uneven table, the scale will be inaccurate. It is best to use it on a relatively flat or horizontal table top, and re-calibrate the machine at this position, so as to avoid the problem of inaccurate weighing caused by uneven table top. In addition, when using, the scale should be placed on a flat and hard ground, and there is no debris under the scale.
3. Confirm whether the standing posture is correct when weighing.
Confirm whether the standing posture is correct when weighing. Please stand upright on the electronic scale with your feet and don't shake your body from side to side. It is also not allowed to weigh with one foot or squatting posture, which will also lead to inaccurate weighing.
4, said several times to take the average.
When weighing, it is best to weigh it several times and take the average. In this way, the weighed weight will be more accurate.
5. Confirm whether the maximum scale weight is exceeded.
Note that when weighing, the weight should not exceed the maximum weight of the electronic scale. Exceeding the maximum range will definitely lead to inaccurate weighing. Moreover, overloading may permanently deform the elastic body and cause fatal damage to the electronic scale.
6. Confirm whether there is radiation interference nearby.
It is best not to use electronic scales near electronic equipment, such as computers, televisions, radios or mobile phones. The radiation of these devices will affect the accuracy of electronic scales. Any electronic scale will be affected by radiation to varying degrees. Electronic scales can receive interference signals from 5 meters away. Therefore, you should avoid making calls to mobile phones or other cordless phones within 3 meters of the electronic scale console.
7. Find another accurate electronic scale for comparison.
You can also find another accurate electronic scale to weigh and compare the average value. If there is a big error between the two, it means that there is indeed an internal problem in the electronic scale, not a simple operation error. At this point, we should look for after-sales maintenance. Electronic scales belong to electronic products, and ordinary users can't repair circuit problems.
The above is the method of how to adjust the electronic scale when it is not allowed. In fact, the structure of the electronic scale is still relatively simple. If there is a problem, we can check it ourselves first. If it is really impossible to adjust it, we can go to a professional master for maintenance or change it directly.