2, before using the juicer need to be connected to the feed cylinder and the host, the feed cylinder is which buckle aligned with the host of the three slot pushed into the mouth, and then rotate counterclockwise, when you hear the click sound when it is said that the connection has been in place.
3, the hexagonal spiral rod aligned with the holes in the main body, after the flat push into the end.
4, the juice net semicircular metal piece aligned with the groove at the bottom of the feed cylinder, flat push to the end of the card firmly.
5, the feed cylinder and the feed cylinder screwed firmly, and then put the juice tray, with the digital side down.
6, insert the bubble plate into the juice catcher, and then put the juice catcher on the juice catching disk.
7, put the pomace bucket under the pomace outlet, close to the juice catching cup, after that, put the tray to the top of the feed cylinder, plug the power cord.
8, wash the fruits and vegetables, cut into small pieces that can be put into the feed port, and the excess can be placed on the tray for backup.
9, press the machine's "start / stop" button products can start to work, the juicer will automatically stop after 20 minutes of continuous work.
10, put the ingredients into the feed port at the top of the feed port, use the push rod to push the ingredients down, then pay attention to push the material force is not too large.
11, after the ingredients are processed, you can turn off the power of the juicer, and wait until the motor and screw have completely stopped rotating, and then take the juicer and pomace bucket away from the juice spout and slag outlet.