Microwave oven magnetron pin wiring method: two poles indirect heating wire voltage, and then any of these two feet on the shell to connect negative high voltage.

Another: magnetron filament and shell short-circuit, can be repaired in this way:

1. First of all, with a small screwdriver, the back cover carefully pry open.

2. Use a small rotary head to knock out the original rivets.

3. Cut the copper wire above the pins (cut the root flush).

4. Install the new seat and tighten it with the 4 screws provided.

5. Thread the broken copper wire into the eye of the holder and clamp it with pliers. Solder it with a soldering iron.

6. Put on the back cover.