The new year is coming, and I'm going to make some greeting cards for my grandparents as New Year gifts.

I'll find a white cardboard first and ask my father to help me paste colored paper on it, and the preparation work will be completed. I took out my highlighter and watercolor pen, and first drew a few strokes on the cover with a silver highlighter. After a while, a snowman appeared on the blue paper. The snowman is still wearing a red cotton-padded jacket, his innocent mouth is full of smiles, and a pair of small hands made of branches seem to welcome you.

Oh, I almost forgot, the snowman has a small nose made of carrots, and a pair of big eyes are cute. It is also wearing a red hat, which is very eye-catching.

Then, I opened the cover, drew a border with a watercolor pen, and wrote my blessing to my grandparents on the left: I wish my grandparents all the best and a happy New Year! I also drew a smiling face below. Then, I drew a few strokes on the right side of the greeting card with a watercolor pen. Soon, a brand-new villa rose from the ground, with two curved doors and four windows of different sizes. On the roof of the villa, there are three Chinese characters "Happy New Year", and beautiful fireworks are blooming on both sides of these three characters.

Finally, I drew some snowflakes. Snowflakes are flying in the air like white butterflies. At the moment when the snow fell, three firecrackers appeared from nowhere, red and crackling. "Goose feather sent from afar, a trifling present with a weighty thought behind it; It's not the gift that counts, but the thought behind it."

Although this is a small card, it can represent my deep blessing. I hope my grandparents can receive my New Year card as soon as possible, so that they can have a surprise! .

Greeting card making method

First, the hollow card is made of "cardboard", which is relatively thick and suitable for making cards. It can be white or colored. "Carving a knife", this is relatively simple. You can draw a pattern, mark where you want to hollow it out, such as blackening it all, and then find an old book or newspaper and carve it carefully. Knives must be sharp and burr-free.

Second, hand-drawn cards have high requirements for painting, and they need colored lead, markers or crayons. Fold the cardboard in half and draw on the folded side. Go to the internet and choose a picture yourself, and just follow the picture.

Third, inkstone paper card, you can go to the stationery store to buy inkstone paper, or simply cut 5mm- 10mm paper with a meat cutter, split the cross-sectional area with a toothpick or a thinner bamboo stick needle, clamp one end of inkstone paper, make it into various shapes you want, and then fix it on the cardboard with glue. (You can view the introductory course of Yan Thesis online)

Some necessary materials: cardboard (250-300g is the best, it is best to buy more colors), ruler, pen (HB is used for drawing, color lead and coloring), meat cleaver, scissors, double-sided adhesive tape and glue (white latex and glue stick). If you want to make it more beautiful, prepare some colored ribbons (for bowing, corresponding to the color of cardboard).

For beginners with incomplete tools, some simple and practical methods and steps are as follows for your reference:

1 Paper-cut, generally buy A4 size, measure the midline position, compare it with paper, draw it with a knife, then fold it in half directly, and cut it off with a knife if it is uneven.

You can find some beautiful pictures on the Internet to print, or color them according to the drawing patterns. Then cut out various shapes (such as square, round, heart-shaped, etc. ), pad a layer of colored cardboard (about 3mm larger than the edge of the pattern) and stick it with glue. Then make a beautiful bow with ribbon on the card and stick it in place. If there are color matching buttons, they can be placed in the corner to balance the whole, which can be more playful. Finally, write a greeting, cut it into small labels and stick it on the card (also in the corner, usually diagonally opposite the button).

3 Find another piece of paper with the same size, fold it in half, cut off a little edge and put it inside the card, so that a card is finished.

The practice of greeting cards

The practice of greeting cards

My own greeting cards are all made of cardboard. If you write a blessing in it, write a small decoration in the picture. Stick something outside and draw something small. I feel good, pull.

Write down what you want to say or draw a beautiful picture, then coat it with a layer of wax (just use a candle) and dye it with watercolor, and you can make a fun scratch card.

*****************************************************************

Computer greeting card

Production steps:

First, create a new document and get it by default. Or set it according to your own needs.

Second, imported materials. Import some photos, flowers, photo frames, cakes, birthday songs and other materials into the library for future use. (These materials are also available online. )

Third, make components.

1, create a new graphic component named "Flower", drag the flower material into the scene and align it in the center (I usually like this).

2. Go back to the scene at home and drag "Hua" to the stage to decorate the scene. You can put more flowers here and fill the scene as needed. After layout, select all of them and right-click to convert them into movie clip components, which are called "flower groups". Select a component and execute the Insert-Timeline Special Effect-Effect-Detach command from the menu. Select upward separation direction, and other settings will be ok by default, and then confirm (Sister Ma won't take a screenshot, so she can't show it! )。 The system will automatically generate a color separation effect and generate a "color separation 1" movie clip. Clear the frame on the layer. Drag and drop the "Separate 1" component to this layer. Execute the separation command again, this time choosing the downward separation direction. This produces a more beautiful effect. This time, the "Separation 2" element is generated. Clear the frame on the layer.

3. Draw candlelight. Create a new movie clip symbol and name it "Candlelight". The first frame of the point layer 1 was selected with the ellipse tool, and it was set to no brush strokes and filled radially. Open the color mixing panel. From left to right, the color codes are #FFFFCC Alpha 0%, #FFE 1CC Alpha 60%, # ffd8ccc alpha 20%, #FFCCCC, Alpha 0% respectively. Draw a circle of 95X95 pixels in the shadow, all centered. Insert key frames in frames 5, 10, 15 and 20 respectively, adjust the halo with the variant filling tool, and then change the positions of Y-axis -4,-10, 0, -9 and -4 for shape interpolation to make it dynamic. Lock the layer.

Create a new layer 2, click the first frame, use the ellipse tool to select no stroke, and the fill color is radial. Open the palette, adjust the color codes to #FFFFCC and #FD6602, and draw an ellipse as a flame. Adjust the highlights with the Fill Deform tool. Insert keyframes in the 5th, 10, 15 and 20th frames respectively, and adjust the flame shape of each keyframe with the selection tool to make it dynamic.

Add layer 3, draw a white wax core line with the rectangular tool and put it in place by candlelight.

4. Create a new movie editing component named "Candle". Layer 1, draw a cylinder as a candle pillar. Align in the center of the stage. Create a new layer 2 and put the "Candle Light" component on the candle.

5. Create a new movie editing component named "Birthday Cake". Layer 1, put a picture of the cake. On the second floor, put the "candle" component. How much if you decide for yourself.

6. Create a new button component. On the first level, enter the opening greeting card text. Draw a rectangle on Layer 2 with the rectangle tool, and then the "pop-up" and "click" pointers respectively identify the effect of each frame.

Fourth, the main task: assembling the scene. The order is from bottom to top.

1, layer 1, click the first frame, drag the picture as the cover from the library to the stage, match the size in the alignment panel, and center it all. Insert key frames in frame 2 and frame 35 respectively. Make animation tween frames 2-35, select frame 35, reduce the picture, and set its Alpha to 0. Insert a blank key frame in frame 36, and then insert another picture from the library as the background image. Insert a frame in frame 440th.

2. Layer 2: Insert a blank key frame in the second frame, add the title of Happy Birthday and put it in a good position. You can make animation effects of tween at will.

3. Layer 3: Insert blank key frames in frame 250th and add birthday greetings.

4. Layer 4: Insert a blank key frame in the second frame, add the "birthday cake" component, and make a tween from bottom to top to frame100th. Then, key frames are inserted in the 250th and 260th frames respectively, and the elements of the 260th frame are reduced to the lower right corner, thus making the tweened animation of the 250th-260th frames.

5. Layer 5: Insert a blank key frame in the second frame, drag the "Separation 2" component to the stage and put it in the middle. The frame is insert into that frame 60. Delete the following frames.

6, layer 6, drag the decorative border and stars to the stage in the library.

7. Layer 7, put the button in the first frame. Then select the button, open the action panel, and enter the statement:

Open (release)

{

play()；

}

Delete all frames after the second frame.

8. On the 8th floor, click the blank key frame of the first frame, open the action panel and enter the statement:

stop()； Stop at the first frame, which is the card surface. Insert a blank key frame in the second frame, and select the music of birthday song from the sound option of the property, synchronization: data stream.

How to make greeting cards? The process should be detailed and described in words.

1. First prepare colored paper, colored pens, scissors and glue sticks, as shown in the figure.

2. Then use scissors to cut five thin strips from the colored paper to make leaves, as shown in the figure.

3. Then take a strip, roll it up from one end and roll it into a whole piece of paper, as shown in the figure.

4. Then loosen your hand slightly to make the paper roll fluffy, then pinch a tip with your hand and stick the end with a glue stick, and a petal will be made, as shown in the figure.

5. Then make five such paper rolls like five petals, as shown in the figure.

6. Then cut the white cardboard into a rectangle with scissors, draw a thick arc on the white cardboard with a green pen as the flower stem, and draw two spiral curves on both sides of the flower stem to represent the leaves, as shown in the figure.

7. It is best to stick five petals evenly on the top of the flower stem, and the beautiful greeting card will be ready, as shown in the figure.

How to make greeting cards

Making greeting cards, taking making Teacher's Day greeting cards as an example; To make personalized Teacher's Day greeting cards, you need to prepare: cardboard, wrapping paper, white paper, scissors, ruler, pencil, glue, clips, lace strips, ribbons and other decorations.

Detailed steps: 1, cut out 22cm* 15cm cardboard with optional colors. Divide the cardboard into three parts according to the size in the picture.

2. Fold the cardboard according to the scribing, and then stick it on both sides of the cardboard with wrapping paper. When sticking the inner wrapping paper, insert two ribbons in the interlayer to tie the ribbon knot after closing the greeting card. 3. Cut white paper according to 14cm* 12cm and 6cm* 12cm, and two pieces of white paper are required for each size.

4. Fold the cut white paper into accordion shape, and then apply glue on both ends, as shown in the figure. 5. The organ made of white paper folds the border and sticks it to the cardboard with glue. We decorated the outside of the border with lace.

6. Put some DIY gifts in the greeting card, close the card and tie a ribbon knot. Make some fun and childlike decorations or write greetings on the outside of the card, and a very beautiful Teacher's Day card will be ready.

.

How to make greeting cards? What materials are needed?

Tools/raw materials

Cardboard pen scissors double-sided colored paper

Methods/steps

1. Take a piece of colored cardboard and fold it in half.

2.

2. Fold one side with the center line, and we draw a heart on the cardboard with a pen.

3. Cut along the drawn lines with scissors, cross the strokes in the heart-shaped space, and write down the greetings. Cut the heart, we will draw a line on the inside of the heart, and then cut it to prepare.

We use small colored paper to fold several layers, and use scissors to cut out half a heart shape.

We use double-sided tape to stick the cut heart in the middle of the greeting card, and find a suitable place to stick the small petals on one side of the heart. We can also make more petals.

6. Cut some petals with blue paper.

7. Stick the petals in different places as shown.

8. Arrange the petals of the glued flowers so that they stand up and have a three-dimensional effect. Complete the drawing.

Making method of greeting card

How to make a heart-shaped greeting card: Preparation materials: red and white cards, tweezers, paper and pen, 5mm note, bead needles, white glue and scissors. Practice: 1. Make cards and cut cards.

The red card is 9.5*9.5cm after folding and 9.5* 19cm after opening. You can mark the middle of the long side (19cm) of the red card with a ruler, and then slide it gently with a meat cutter to facilitate folding the cardboard.

The size of the white card is 8.5*8.5cm 2. Make a heart-shaped outline. Make a circle with a diameter of about 4.5cm with a piece of paper (two circles increase hardness) and paste it inside and outside.

3. Fold the ring in half at the joint, so as to ensure the symmetry of the heart. 4. According to the size of the circle, find a suitable and safe position.

Apply a little glue to the bottom, fix the bottom on the bottom card first, and then proceed to the next step when the glue dries. 5. Apply a little glue to the bottom, fix the bottom on the bottom card first, and then proceed to the next step when the glue is dry.

6. After the bottom is fixed, glue the sides and the top. Finally, press down the crease in the middle to make a beautiful heart shape you like.

7. Keep the center of the heart consistent with the center of the card. 8. After the heart-shaped stuffing is loosened, wrap the left hand as tightly as possible, and then let it spread naturally.

The length of the note in this tutorial is between 6- 10cm, which is not exactly the same, about 40. You can also adjust it according to your favorite size.

9. Each volume does not need to be stuck in a monotonous circle. Clamp the opening with tweezers and stick a small amount of white glue.

10. Fill along the heart-shaped border in turn. Press with your fingers after sticking.

1 1. After all the cards are glued, the cards are finished.

Methods and steps of making greeting cards

Tools/materials: cardboard colored paper, love, star sticker, highlighter, eye scissors, glue, double-sided tape.

Card covering method/step

1 Fold the cardboard in half.

Cut the yellow paper into the shape of an egg, and attach an eggshell cap and eyes.

Stick it on the card.

Cut a white fence.

Write down Happy New Year or Happy New Year's Day with highlighter. Put on a love sticker. The card cover is complete.

Method/steps for make card inner pages

Stick a piece of white paper smaller than cardboard.

Cut a cartoon egg and some eggs; Three-dimensional effect of the bracket.

Fold the note and stick it on the card as shown.

Stick all your balls on the bracket.

Finally, put on some star stickers. And cute. If you like it, do it.