Drinking is a very enjoyable thing, but it is very difficult to open the bottle cap. It is basically impossible to open the bottle cap with your bare hands. Therefore, before drinking, we must first be equipped with a multifunctional bottle opener, so that we can open the caps of many kinds of wine. There are many kinds of multifunctional bottle openers in the market, and their functions are quite complicated, so it may be difficult to use them. The following small series will introduce you to the correct use of multi-function bottle opener.

Correct use of multifunctional bottle opener

First, clean the bottle. First, use a knife to cut the rubber cap along the circular protruding part of the bottle mouth. Pay attention to changing hands. Don't turn the bottle. If it is old wine, there will be normal sediment at the bottom of the bottle. Turning the bottle will make the sediment float. Be very careful when handling tin bottle caps. It often leaves a razor-sharp edge, and it is inconvenient for your hands to accidentally touch it. Wine produced in some countries will have an opening tape at the bottle mouth, so it's simple. Just tear the sealing tape. Don't turn the bottle when your hand is moving, because it may "wake up" the impurities deposited at the bottom of the bottle and affect the taste.

Wipe the bottle mouth clean with a table cloth or paper towel. If mold is found on the top of the cork, don't be nervous. It is normal to have a little mold ash. It can't be said that the wine is broken. Just wipe the bottle neck with a clean cloth. If it's an old bottle covered with lead, you should be especially careful, because a small amount of leaked wine will react with lead to produce toxic leadsalts.

At this time, insert the tip of the corkscrew of the bottle opener into the center of the cork (if the drill is crooked, the cork will be easily pulled off), then erect the corkscrew and slowly rotate clockwise to drill into the cork. Don't drill the auger all at once, it's better to leave a ring. Because I don't know the length of the cork, if I drill all the auger at once, it will go through the cork and sprinkle the cork into the wine.

First, buckle the first movable joint on the bottle mouth and hold it tightly with your left hand; Then lift your hand straight with your right hand. Note: the left hand must be clenched, while the right hand is "lifting" rather than pushing, otherwise it is easy to infer the cork. In addition, lifting will be more labor-saving, because the longer the arm, the more labor-saving.

When the cork comes out halfway, buckle the second joint on the bottle mouth and repeat the previous action.

Stop when you feel that the cork is about to be pulled out, hold the cork with your hand, gently shake or turn it, and gently pull out the cork.

The correct use of multi-function bottle opener, Xiaobian has given you a detailed introduction in the above. Drinking is an art, and opening the bottle cap is also an art and technology. It takes time to skillfully open the bottle cap. When you first start using the multifunctional bottle opener, you may feel that the multifunctional bottle opener is not as powerful as the legend, but the function of the multifunctional bottle opener is indeed very great. With good practice, everyone can open a lot of wine bottles.