Instructions for use:

Pre-use instructions: For the first time use, please take out all the accessories from the cooker and read the instructions carefully, paying particular attention to the use and precautions, so as to avoid financial loss or personal injury to you.

Cooking Preparation:

1. Open the lid correctly: first, hold the lid tightly in your hand, rotate the lid clockwise to the lid-opening limit side, and then lift the lid upward.

2, check the lid parts are well installed: check the float valve and exhaust valve is not clogged, make sure that the sealing ring, anti-clogging cover parts are well installed.

3. Remove the inner pot and put food and water into the inner pot: the total amount of food and water should not exceed the Max line of the inner pot height.

4. Place the inner pot into the pressure cooker: Before placing it in the pressure cooker, please make sure to remove any debris and water on the outside of the inner pot; after placing it in the pressure cooker, gently rotate the inner pot from side to side to make sure that the inner pot is in good contact with the heating plate.

5. Close the lid: Before closing the lid, check that the sealing ring has been placed on the inner steel ring of the lid. Hold the lid handle, flat to open the lid limit edge, and then rotate the lid counterclockwise to the snap position, and hear the "click" snap sound.

6. Place the exhaust valve: dial to the sealing area and check that the float valve is not dropped (the float valve is dropped before heating work).

General Functions:

1. Make preparations.

2, turn on the power: digital tube flashing display "----" red horizontal line, indicating that the electric pressure cooker has entered the ready to work state;

3, select the desired function file: press a function key, the corresponding function file indicator will light up (red); rice function and cake function is only for products with this function file; the different function files of the product; the function file of the corresponding function will light up (red); the function file of rice and cake function is only for products with this function file; the function file of the different function is only for products with this function file. The cooking time of different function is different, the larger the amount of food, the longer the cooking time is accordingly.

4, press a function key, after 10 seconds the pressure cooker starts to execute the corresponding function program selected: within 10 seconds, you can re-select the reservation time and function file, and the pressure cooker will start to work after 10 seconds of final confirmation of selection. The red line "----" on the display lights up, indicating that the pressure cooker has entered the state. During the working process, press the "Keep Warm/Cancel" button to cancel the existing working status and return to standby mode.

5, the end of cooking, automatically enter the heat preservation state: after the end of cooking, the corresponding function indicator lamp off, heat preservation light (yellow), the display shows "0.0", while the sound (10 times DiDi sound), the electric pressure cooker into the heat preservation state. In standby mode, press the "keep warm/cancel" button, the keep warm lamp lights up (yellow), at the same time issued a tone (1 time DiDi sound), indicating that the electric pressure cooker into the keep warm state.

Note: There are many other cooking functions, please refer to the manual inside the package.

Hope it can help you.