Nowadays, the function and quality of the soybean milk machine are very good, but when we use the home soybean milk machine has a certain number of years, there will always be more or less some problems. If it is only a small problem, we take care of it ourselves, do not need to send repair, save money and labor. The following is my compilation of the United States soybean milk machine fault repair methods, I hope to help you.

Soybean milk machine plugged into the power supply does not power no response:

1. The circuit is short-circuited, resulting in damage to the fuse. Solution: Replace the fuse.

2. High voltage or water inside the machine, resulting in damage to the low-level transformer coil. Solution: Replace the transformer.

3. The computer board is damp, and the voltage regulator pin is rusted and broken or damaged. Solution: Replace the computer board.

4. Poor contact with the power socket, or the plug is not secure. Solution: Plug it in.

Soymilk maker indicator light is on, but can not operate:

1. Computer board moisture, which causes the relay failure. Solution: Replace the board.

2. Improper use, resulting in water inside the machine, causing the computer board short circuit. Solution: Use a hair dryer to blow dry the computer board and water inside the machine.

Connected to the power supply, but the soybean milk machine can not send out the alarm sound:

1. Use for a long time, the buzzer aging damage. Solution: Replace the buzzer.

2. Computer board moisture, chip problems. Solution: Replace the computer board.

3. Improper use, resulting in water inside the machine, causing the computer board short circuit. Solution: Use a hair dryer to blow dry the computer board and water inside the machine.

4. Or the transformer secondary end plug and computer board contact is poor. Solution: Check whether the transformer secondary end plug and the computer board are connected properly.

5. Continuous use for too long, the transformer burned out. Solution: Replace the transformer.

Soymilk machine power, but can not be heated;

1. Computer board moisture, voltage regulator feet rust broken or broken. Solution: Replace the computer board.

2. Improper use, resulting in water in the machine, the computer board local short circuit. Solution: Use a hair dryer to blow dry the computer board and the water inside the machine.

Soybean milk machine can be heated, but the motor does not run.

1. Inside the machine, the motor is damp and the coil is short-circuited. Solution: Replace the motor with a new one.

2. Relay can not be absorbed or broken legs. Solution: Replace the relay.

3. Continuous use for a long time, resulting in the temperature of the series motor is too high. Solution: Turn off the switch, suspend the use, slowly cool the motor.

4. Improper use leads to water in the machine, the computer board local short circuit. Solution: Use a hair dryer to blow dry the computer board and water inside the machine.

1, in the production of soybean milk according to their own needs to take out the appropriate amount of ingredients at the same time according to the measuring cup and model to determine the amount of material. In the production of soybean milk, you need to prepare the soybean soaked in water.

2. Put the prepared ingredients into the measuring cup after cleaning, and add water to the upper and lower water levels.

3, the soybean milk machine grain grinding machine in accordance with the instructions of the soybean milk machine in the direction of the installation of the direction, so that the grain grinding machine and the lower cover of the seamless tight connection between the installation is completed and then double-check whether the installation is in place.

4, the head of the machine in accordance with the exact position into the cup, plug the power cord of the soybean milk machine, wait until the indicator light of the soybean milk machine is fully lit, press the required function keys, the corresponding indicator light, and at the same time, start the corresponding production program.

5, until the soybean milk machine in accordance with the set program for the operation of the pulp, soybean milk after sufficient boiling, the machine issued a prompt soybean milk production is complete. 6, the production of good soybean milk pouring, the machine clean.