Current location - Recipe Complete Network - Healthy recipes - Black coal cake
Black coal cake
If there is no patina, use the first one first. If there is patina, just use the second one directly.

First of all, if there is no patina, there is a simple method: hang it for three or four months and let it slowly oxidize into purple. During this period, you can wear cotton gloves for about 20 minutes every day (it is recommended to change new gloves once a month). Remember not to let the beads touch any liquid, especially sweat, before the patina is formed. If it comes into contact with liquid, it will turn into a black briquette.

A more complicated method:

The first step is to wipe the surface with cotton cloth once a day (it is normal for the cloth to be dyed red, and it will fade gradually. ),

Step 2: Leave it for a week for oxidation.

The third step is to get started. Wash and dry your hands thoroughly, and it is best to wear an emery cloth glove tray. Dry hands and slightly sweaty hands can be directly loaded. Pay attention to the beads around the nozzle, which can be coiled for about half an hour every day.

The fourth step is to let it oxidize for another week or so.

Then repeat the third and fourth steps five or six times, and you will basically come out. The surface of rosewood will have a strong reflection similar to the glass texture.

The last three pictures of rosewood (the first one is before the oxidized hand plate, and the second one is the first plate of the same pearl. The third year of direct oxidation):

If you like red rosewood, put it in a sealed bag and wait for the patina. But I think rosewood is boring if it is not purple.

Red sensory map:

Before there is no patina or patina is incomplete, let's talk about Jin Sinan's method.

The first step is to put on cotton gloves or silk and rub the surface for half an hour every day to remove sawdust powder, and stick to it for about a week until it feels light and transparent.

Step 2, put it in a sealed bag in the shade or in the cold room of the refrigerator (it is not recommended to put a household refrigerator, you can buy a few hundred small refrigerators or clean the household refrigerator. ) Refrigerate for one week.

Step 3: Take out the beads that have been placed for one week, and continue to place them for one week, so that the surface of the hand beads will be exposed to air for oxidation. The color of the bead surface will gradually change to gold, purple and gold or dark gold.

Step four, pass the beads directly. Make sure your hands are clean and dry when you dish, and don't take out your sweaty hands to dish beads. When rolling the ball, the surface of the bead should be rolled evenly to make the bead slightly hot, especially around the hole of the hand bead. If you persist for half an hour every day for a week, you will find that there will be a slight sticky feeling when you roll the beads, which is the performance of patina formation. If there is no good food and you sweat, you can wash it with soft water or a little olive oil, and the effect will be much worse. )

Step five, repeat two or three steps. When you don't dish beads, put them in a special small cloth bag. It will be basically completed in about four or five months, and the surface of Jin Sinan will be crystal clear.

Send you a photo of Jin Sinan, with a good initial disc:

If both of your beads are old products with patina, then I suggest you don't wash off the heavy dishes and just start serving (of course, try to keep your hands clean). After a long time, it will feel dull and quaint, and it will have a different taste.

Object, object, don't worry too much about the joy and harmony of figure 1. What matters is the pleasure in the process of dish, not the pain. In fact, as long as you work hard and work hard for a long time, no matter what the appearance and the final bead will have its special temperament and charm.

After reading it, you will find that the methods of the two materials are similar. In fact, this similar method is applicable to almost all wooden beads. I hope you will succeed.

Finally, I will give you the addresses of two related posts, hoping to help you:

/f? kw = % BD % F0 % CB % BF % E9 % AA & ampfr=ala0

/f? kw = % D0 % a 1% D2 % B6 % D7 % CF % CC % B4 & amp; fr=ala0

The original arrangement of books and swords is for reference only.

I hope I can help you. Ask me if you have any questions.

Pay tribute to everyone who is willing to help others, and gently shake your head to every malicious Replicator.

Dear Questioner: Everyone who answers your questions seriously has a warm heart to help others. For you and me, we are all open-minded and not shameless. What most interviewees expect is not the points, but the happiness of applying what they have learned and helping others. The enjoyment of knowledge and information is not rapid and free, but knowing that it has given us such a favor, when we accept the gift from the respondent, we save time and energy. Should we be at least humble and grateful? People who ask for help, as long as you thank them and click a few times, more questions and answers that shine with the brilliance of human nature will continue to happen here. Don't let laziness and emotions become a basin of ice water, and finally put out the fire of helping others. Take seriously the kindness of the respondent who helped you in time, whether it is me or not.