1. Place the electronic scale on a flat and stable ground.
2. Turn on the power supply, turn on the switch of the electronic scale, and wait for the electronic scale to automatically reset to "0".
3, in the case of no load, press the MODE key. Select the unit as the required unit of measurement (such as kg or g).
4. Press the tare key and wait for the electronic scale to reset to the "0" position.
5. Put the object to be weighed on the scale, wait for its weight to be stable, and read the weight value displayed by the electronic scale.
6. Adjust the stability of the electronic scale. If the display data of the electronic scale is unstable, we can try to readjust the balance of the scale plate or change the position of the scale to improve the stability of the electronic scale.
7. Calibrate the electronic scale. If there is a big deviation in the display data of the electronic scale, it can be calibrated. Please refer to the user manual for calibration method.
8. Check the range and bearing capacity of the electronic scale, and do not exceed the rated load range.