We often hear about Jiuyang Soymilk Machine in TV advertisements. Jiuyang soymilk machine is produced in Jinan, adopting simple circuit and fully automatic microcomputer numerical control technology. It's very helpful to make breakfast in the morning, but what if Jiuyang Soymilk Machine is broken? Next, Bian Xiao will give a brief introduction to this knowledge for your reference in real life.

1. Structure and working process of Jiuyang soymilk machine;

First of all, Bian Xiao briefly introduced the external structure and workflow of Jiuyang Soymilk Machine. Generally speaking, the satellite of Jiuyang Soymilk Machine is cylindrical and divided into upper and lower parts. The upper part is used to hold soybean milk, and the lower part is controlled by the motor of the circuit. Its working process is as follows: using the knowledge of circuit, the motor rotates after being electrified, and the top of the motor is equipped with a sharp steel knife, which will chop beans, and the beans and water are mixed together to make soybean milk.

Second, the common faults and maintenance of Jiuyang soymilk machine:

Next, Bian Xiao will introduce you to the common faults of Jiuyang Soymilk Machine. Generally speaking, there are many common failures of Jiuyang Soymilk Machine, including the following:

1, Jiuyang Soymilk Machine has no response after being electrified, and the switch indicator light of Jiuyang Soymilk Machine is not lit. Generally speaking, this is caused by the burning of the primary winding and the open circuit of the internal temperature insurance of the primary winding. In this case, you can replace the transformer and wait for a period of time to return to normal.

2. The motor is difficult to start;

In Bian Xiao, it is difficult to start the motor of Jiuyang Soymilk Machine. The reason is that the carbon brush is excessively worn and can't be electrified quickly when working. Then such a fault is generally caused by short circuit on the armature, or it may be that the lubricating oil on the armature is wrong after the cover is opened. If the motor has such a fault, you can choose to clean the armature and wait for a period of time to return to normal.

3. Jiuyang soymilk machine only heats and does not beat;

Another common problem is that Jiuyang Soymilk Machine only heats and does not beat. This problem is generally caused by the open circuit of R lead caused by motor vibration. Then you can disassemble the bean sprouts and beans and weld the lead firmly, so that the fault can be directly eliminated.

For Jiuyang soymilk machine, there are many common faults. For some simple faults, such as loose lines, excessive carbon brush wear, motor overload, etc. These can be solved and repaired in a short time. If you don't know the circuit knowledge, you can find some professional maintenance personnel, or directly put Jiuyang Soymilk Machine in the maintenance point. If we know a little about the circuit, we can take it apart and repair it ourselves. If the failure of Jiuyang Soymilk Machine is relatively serious, Bian Xiao suggested that professional maintenance personnel should be found for maintenance. I hope that Bian Xiao's introduction to you can bring you some help.