How to install ghostwin7 system under pe? pe is a windows pre-installation environment that can be used for system installation and maintenance. Some users encountered problems during the process of installing the system on their computers. They don’t know how to use winpe to install the ghostwin7 system. To install the ghostwin7 system under pe, you need to use a production tool such as Chinese cabbage to write the pe system into a U disk and make it a pe bootable system. plate. The editor below will introduce to you the tutorial for installing ghostwin7 system on winpe.

Operation instructions:

1. If it is a new computer or the computer system has been damaged, you need to use another available computer to make the winpe boot disk

2. If the computer runs with a memory of 2G or less, install a 32-bit (x86) system. If the memory is 4G or more, choose a 64-bit (x64) system.

Related reading:

U disk manual ghost installation system Tutorial

How to back up C drive desktop data after system crashes

1. Preparation work

1. System download: Fenglinhuoshan ghostwin764-bit speed trial version V2018 .01

2. 4G and above U disk: How to make a winpe boot U disk

2. U disk startup settings: How to set the boot to boot from the U disk

3. The steps to install ghostwin7 system on winpe are as follows

1. Make the winpe boot disk according to the above tutorial, and then copy the downloaded ghostwin7 system iso file directly to the GHO directory of the USB flash drive;

2. Insert the winpe boot disk into the computer that needs to install the system. After restarting, press F12 or F11 or Esc and other shortcut keys to open the startup menu. Select the U disk option and press Enter, such as GeneralUDisk5.00. These startups are not supported. Click the computer to view the second point to set the U disk boot method;

3. Enter this menu from the winpe boot disk, select the 02 option through the arrow keys and press Enter, or you can directly press the number key 2 to start pe System, if you cannot enter, choose the 03 old version PE system;

4. Enter the winpe system. If you do not need to repartition, go to step 6 directly. If you need to repartition, you need to back up all data, and then double-click to open DG Partition tool, right-click the hard disk and select Quick Partition;

5. Set the number and size of partitions. Generally, it is recommended that the C drive is above 35G, preferably 50G. If it is a solid-state disk, check "Align Partitions" "2048 sectors means 4k alignment. If it is not a solid-state disk, there is no need to check it. The default sector is 2048. Click OK to perform the hard disk partitioning process;

6. After the hard disk is partitioned, open the Chinese cabbage and install it with one click. Select the ghostwin7 system iso image as the image path. The gho file will be automatically extracted at this time. Click the drop-down box and select the win7.gho file;

7. Then click "Restore Partition" and select the installation location, usually the C drive. , the drive letter under winpe may be displayed incorrectly. If the C drive is not displayed, you can select according to the "volume label" and disk size, and click OK;

8. A prompt box will pop up, check "Restart after completion" " and "Boot Repair", click to start the ghostwin7 system installation operation;

9. Go to this interface and install the ghostwin7 system to the C drive. This process takes about 5 minutes;

10. After the progress bar reaches 100, the computer will automatically restart. At this time, pull out the U disk, restart to enter this interface, and continue the ghostwin7 system installation and activation process;

11. System installation process It needs to be restarted several times, and finally it boots to a new system desktop, and the process of installing ghostwin7 system from winpe is over.

The above is how to install the ghostwin7 system under pe. If you need to install the ghostwin7 system on your computer through winpe, you can refer to the above steps.