The juicer can be used anytime and anywhere to extract fruit juice for drinking, especially if the fruit is bought more than one and afraid that it is bad, then it can be extracted into juice for drinking, and the nutritional value is also the same rich. Inside the juicer into the cut pieces of fruit and a certain amount of water, you can power the juice, then the juicer appears to power the failure is what is the case?

First, the juicer plugged in does not turn what is going on

1, the socket without electricity or internal copper electrode distance is too far from poor contact.

2, the power cord or plug has a short circuit fault.

3, the juicer has a safety protection device, on the bottom of the mixing cup and the base of the contact bayonet. It will not operate when the mixing cup is not rotated into place.

4, If the safety switch itself is damaged, it will not operate.

5. If the gear key or key internal connection wire terminal is loose, it will also not operate.

6. Damage to the copper head converter on the motor rotor can also cause non-operation.

7. Damage to the stator coil can also cause non-operation.

8. Badly worn brushes can cause non-running.

9. Electronic circuit failure.

Second, Jiuyang juicer energized with power and no response how to do

If there is no response after pressing the switch after the juicer is energized, it may be caused by incorrect installation methods. For example, the cup and the machine are not connected in place or improperly installed, so in this case it is not. Another reason for being able to spin is because the ingredients in the cup are not particularly suitable. If the weight of the fruit is too light when juicing, the cup will not be able to rotate, and you will have the problem of no response when you press the switch.

If the first problem is the cause, the cup can be removed and reinstalled. If it's caused by the second reason, then you can add more ingredients to the juicer or add some water as appropriate. You can rotate it. If you have tried these two operations and the juicer still doesn't work, you need to see if the juicer is broken.

Third, the juicer does not turn how

First, check whether the juice cup is installed in place. Juice cups are cups used to hold juice. If it is not installed properly, it will not be able to collect juice. When the machine detects this abnormality, it will not turn. Therefore, check the position of the juice cup as soon as you notice a problem with the machine.

Next, check the supply voltage. The voltage at home must be the same as the voltage required by the juicer. If it is too low, the juicer will not turn. It must be stopped for 20-30 minutes before restarting.

Check the power supply and motor windings again. If the power cord is loose, connect the power supply to fix the problem. If the motor windings are causing the problem, a new motor will need to be considered based on the inspection.

If you can not find the cause of the case, it is best to find a professional maintenance personnel to deal with, to ensure that the repair as soon as possible, does not affect their own use.