1, first of all, before use should be checked whether to connect the canned liquefied petroleum gas pipeline and whether it is firmly connected before use.

2, to the residual oil basin poured into the appropriate water to maintain a certain amount of water to prevent drying. If the water dries out, pump out the stove sump and add water again.

3, open the gas main valve, press and rotate the electronic ignition switch to the left, ignite the stove head (combustion plate) should be released, you can adjust the fire size.

4, ignition confirmation: ignition, lightly press the switch to the left screw, visible beam of fire rushed up to the combustion plate, the entire combustion plate ignited. If you do not see a light blue flame on the combustion plate, this is not lit, please re-lighting, until lit. At first, a thin flame can be seen on the surface of the burner plate, and after about 1 minute, the flame gradually recedes, showing no bright flame and reddish heat.

5. After use, the gas main switch and each ignition switch should be closed.