During the construction of mortar horizontal tile roof, there should be a mortar protective layer on the insulation layer, which should be leveled and compacted, with the maximum flatness error between 5mm and timely maintenance.

The horizontal tile layer is 1:3 cement mortar, 150* 150 steel mesh, and the eaves of the roof panel and the embedded anchor bars are firmly connected. When it needs to be fixed with ceramic tile, the vertical and horizontal spacing of steel bar should be determined according to the specifications of ceramic tile. Next, pay-off: firstly, play the outline of the building surface with the center line of the roof, then determine the position of the first floor tile on the roof from the roof upwards (generally calculated by subtracting the length of the roof pick-up line from the length of the tile by 50mm), play a straight line parallel to the center line of the roof, and then pop up cornice edges perpendicular to the center line of the roof at the left and right cornices 50mm, and pre-arrange control lines according to the allowable adjustment range and area of the tiles; Before tiling, the leveling layer and colored cement bricks should be in a wet state, and the tiles must be aligned with the control line and spread from left to right and from bottom to top. The first floor tile of cornice should be flush with the upper two floors. The method is as follows: take three tiles and put them on the laying control line of the three-layer floor tile, with the cornice facing upward, and the cornice tiles will sag at this time. First, use cement mortar to pad and fix the first tile laid on the cornice, so that it is in a horizontal line with the upper two tiles, and then lay both sides horizontally according to the control line.

Here remind users to pay attention to reinforcement measures when installing colored cement bricks. According to the design requirements, the ceramic tile is fixed on the steel wire mesh with 18 galvanized iron wire, and the mortar at the bottom of the ceramic tile should be full.

At present, most of them are dry hanging construction. For detailed construction, please consult Shi Sheng Zhuoye roofing tile manufacturer, with 20 years of construction experience, to create a satisfactory solution for you.