U disk has replaced optical disk as the most popular way to reinstall the system. Ordinary USB flash drives also have the function of reinstalling the system. You need to make a startup disk with tools such as cabbage, and then reinstall the system with the one-button ghost tool built into cabbage pe. So how to use the one-button ghost of USB flash drive? First, you need to have a USB boot disk, and then set up the computer to boot from the USB flash drive. The following small series will share with you the tutorial of one-button ghost reloading system of U disk.

Reinstallation instructions:

1. If the computer system can't start, you need to use another available computer to make a USB flash drive.

2. Choose a 32-bit (x86) system if the memory is 2G or lower, and a 64-bit (x64) system if the memory is 4G or higher.

Related tutorials:

One-click ghost reloading win7 tutorial

U disk manual ghost installation system tutorial

The method of pe backing up the desktop data of disk C when the system crashes.

First of all, the preparation for reloading.

1, system image download: Chinese cabbage U disk system download.

2.4G and above USB flash drive: How to make Chinese cabbage USB flash drive?

Second, the U disk startup settings: How to set the boot to start from the U disk?

Three. The steps for reinstalling the ghost system with one key on the USB flash drive are as follows

1. Make a Chinese cabbage U disk boot disk according to the above tutorial, and then copy the downloaded ghost system iso file directly to the GHO directory of the U disk;

2. Insert the U disk of Chinese cabbage into the computer that needs to reinstall the system. After restarting, continue to press F 12, F 1 1, Esc and other shortcut keys to open the startup menu, and select the U disk option to enter, such as GeneralUDisk5.00. For computers that do not support these startup keys, check the startup mode of the U disk at the second point.

3. Enter this interface after booting from the USB flash drive, and select the 02 option through the direction key to enter, or directly press the number key 2 to start the pe system. If you can't get in, choose 03 old PE system;

4. After entering the pe system, if you need to re-partition, you need to back up all the data, then double-click to open the DG partition tool, right-click the hard disk, and select Quick Partition;

5. Set the number and size of partitions. It is generally recommended that the C disk is above 35G. If it is a solid-state hard disk, check "Align Partition" for 4k alignment, and click OK to partition the hard disk.

6. After the hard disk partition, open the cabbage and install it with one button, and the mirror path selection system is iso mirror. At this time, the gho file will be automatically extracted, and click the drop-down box to select the gho file;

7. Then click "Restore Partition" and select the installation location of the system, usually disk C. If disk C is not displayed, you can select it according to "volume label" or disk size, and click OK;

8. At this time, a prompt box will pop up, check "Restart after completion" and "Boot repair", and click Yes to start one-click ghost system restore;

9. Enter this interface and perform the operation of installing the system to drive C. This process takes about 5 minutes, so just wait patiently.

10. After the operation is completed, the computer will automatically restart. At this time, the USB flash drive can be unplugged or unplugged, and then it will automatically restart and enter this interface to continue the process of reinstalling the system and system configuration;

1 1, and the whole reinstallation process takes 5- 10 minutes. Finally, after the system restarts, it is reinstalled into a brand-new system desktop.

Here is to introduce the steps of reinstalling the ghost system with a USB flash drive. Friends who don't know how to use one-button ghost of U disk can learn this tutorial.