The correct methods and techniques for adjusting the drift are as follows:

1, coarse bottom finding: the lead holder wrapped with lead, cast into the fishing point, ensure that the float is all out of the water, and then push up the float until the eye is exposed.

2, pull down the float: usually to pull the length of 1 subline plus 10-15 cm, so that after hanging double hooks, the lower hook is 10-15 cm from the bottom.

3.Trimming the Lead Shell: Trim the lead shell until the float reveals the set number of sights.

4. Drift check: Pull the rod and pull the end of the float into the water to check if it will return to the set number of sights.

5. Hang double bait: Push the float up until it is flat.

Drifting refers to adjusting the ease of fishing by increasing and decreasing the counterweight. Generally speaking, the adjustment is the weight of the lead skin, so that after the adjustment, we can achieve an optimal fishing environment when we are fishing. Although this description seems to be relatively simple, but if you want to adjust it well is not easy, there are also some tips to pay attention to when adjusting. Depending on the fishing situation, you need to adjust the float at any time.

The adjustment of the float is a very important thing in the process of fishing, its purpose is three points. The first is to measure the depth of the water, which varies, and the fishing methods adopted tend to be somewhat different. The second is to understand the condition of the hooks and baits under the water, take double hooks as an example, whether one hook touches the bottom and one lies on the bottom, or two hooks lie on the bottom, or one hook is off the bottom and one touches the bottom, according to the different conditions, you can continue to make adjustments. The third is to increase the possibility of fish mouth, in the end, the purpose of fishing is still to catch more fish.