Fishing and drifting skills
First, the purpose and requirements of finding the bottom
Whether the requirements for finding the bottom and the measures taken are correct depends on three situations.
1, the depth of the water level should be found, and after the fishing point is selected, the water depth and underwater conditions before and after exploration should be explored; When fishing in deep water, it is easier to determine the adjusting eye, and in addition, it is necessary to determine the adjusting eye near the bottom of the water to avoid the influence of the waterline; Also, when fishing underwater, you must avoid the situation that the bait is not in place.
2. The above requirements are relatively simple, and the accuracy of finding the bottom is not high. Add a heavy object to the hook or lead pendant to make the float sink completely, and then push the float upward to expose the required number of eyes. If you use big bait to find the bottom, you can also take into account nesting.
3. As long as the bait is under the water, the fish mouth can be guaranteed, especially for wild fishing. The sensitivity requirements for the salvage team are not very accurate. When fishing, the state of the hook and bait secondary line can be appropriately changed according to the situation of the fish to achieve the ideal degree. However, the environment in the wild waters is complex, and many obstacles are easy to cause damage to the line group. It is best to use high-quality thread sets to reduce the occurrence of broken lines and fish running.
Second, accurately find the bottom to find the state of the hook bait
1. In the competitive fishing competition, there is a high demand for finding the bottom. Always know the situation of the hook and bait sub-line in the water, so that you can know fairly well when you distinguish the drift. This bargain-hunting goal is different from the above goal.
2. The usual method of finding the bottom is to hang a rubber slightly heavier than the bait on the upper hook or the lower hook, and then move the float to expose two eyes after the float sinks into the water, so changing the bait means catching two eyes. If the rubber block is hooked, the double hook bait is in undercover state; if the rubber block is hooked, the hooked bait is suspended and the hooked bait is undercover.
3. However, there seems to be some problems in the method of using rubber and other heavy objects to quickly find out the bottom and determine the fishing eye. It is easy for novices to find out the state of the bait string in the water. Although rubber quick is the same as bait, its size is different, which may lead to different mesh numbers after replacing hook bait with fine floating tail. In addition, when the weather environment and water conditions change, there will be many combinations between the thickness of the drift tail and the bait, which can not fully achieve the purpose of fishing bait.
Third, adjust and fish.
In order to know the state of hook bait and sub-line in water, it is necessary to realize a more scientific and reasonable method by coordinating the distance between eye adjustment and fishing, the thickness of drift tail and the weight of bait ball.
Adjust the eyes
There are three points in this regard. The first is to remember the number of semi-Shui Piao without hook; The second is to remember the mesh number of semi-water bleaching in double hook state; Third, double hook bait should remember the mesh number of half Shui Piao.
Fishing eye
At this time, hang the bait on the double hook, put it in the fishing point and start to adjust the fishing eye. When the fisheye is in the hook-free state, the number of eyes is the dullest when it is half-floating, and it is at the midpoint of the lightest and dullest number when it is in the double hook state. If the fishing eyes are sharpest when using double bait for semi-drifting, it can be used as the number of eyes when semi-drifting.
Fourth, the correct bleaching method
In fact, bottoming is not a separate procedure, but is included in drift adjustment.
1. Always know whether the bait is at the bottom, and always know the state of the bait.
2. Some friends think that finding the bottom with bait may affect the accuracy of finding the bottom, because the dissolution of bait will affect finding the bottom, but you can rub the bait hard to find the bottom. If you are worried about fish grabbing food, you can use the same weight of rubber blocks or chewing gum instead of bait to adjust the drift, but it should be noted that the state of adjusting the drift and finding the bottom is different. In this case, the phenomenon that the bait is not hooked to the bottom will hardly happen.
If you know the water depth, you don't need to hang heavy objects to find the bottom first. For example, if the water depth is one meter, the influence of the waterline is very small, but if you are not familiar with the water regime of the fishing spot, you should first find the bottom, and then determine the eye adjustment near the bottom to ensure accuracy.
Finding the bottom is not only to find the bottom of the water, but also to consider the situation of the fish. It is necessary to adjust the fishing method at any time according to the change of fish situation and find the best fish mouth, so as to truly ensure bottom fishing. If the fish situation changes, we should choose the right fishing rod according to some factors such as the speed of the fish situation and the size of the fish.
Ways to reduce fish running by fishing
The reason for running fish
First, the timing of lifting the pole is not allowed. Generally speaking, the rod is lifted too early and there is no hook, which leads to fish running. If the pole is lifted too late, the fish will lose its needle, but this is rare.
Second, the size of the hook is not appropriate, the hook is too small to catch big fish, and the hook is not firm; The hook tip is not sharp, the barb angle is too small, the hook is not firm, and it is easy to take off the fish; There is also the wrong way to tie the hook, and the knot of the mouth line is not inside the hook handle.
Third, the bait is too tender, too long or too big. When the fish touches the bait, it either falls down at the touch, or the fish is unhooked before it is firmly caught.
solution
(1) Lift the pole in time. Don't lift the pole when the float starts to move slightly. It is most appropriate to lift the pole until the fish floats or sinks.
(2) If the hook is not suitable, replace the hook in time and adjust the ligation site. After using the hook several times, sometimes it needs polishing. A good hook should feel sticky.
(3) The bait should be suitable. For example, earthworms leave only half an inch outside the hook, which is shorter in winter and slightly longer in spring and summer. Flour bait should be sticky to prevent fish from falling off as soon as they are eaten.
People who have seen fishing and drifting tricks will also see:
1. How to adjust the fishing drift?
2. How to adjust the fishing drift in winter?
3. How to adjust the drift in wild fishing?
4. How to treat drift correctly in fishing?
5. How to quickly adjust the drift for leisure fishing?